SECURITIES AND EXCHANGE COMMISSION
Washington D.C. 20549
|(Mark One)|| || |
|☒|| ||ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934|
|For the fiscal year ended||December 31, 2021|
|☐|| ||TRANSITION REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934|
|For the transition period from to |
Commission file number 001-10716
(Exact Name of Registrant as Specified in Its Charter)
|(State or Other Jurisdiction of Incorporation or|
|(IRS Employer Identification No.)|
38505 Woodward Avenue, Suite 200
Bloomfield Hills, Michigan 48304
(Address of Principal Executive Offices, Including Zip Code)
(Registrant's telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
|Title of Each Class:||Trading symbol(s)||Name of Each Exchange on Which Registered:|
|Common stock, $0.01 par value||TRS||The NASDAQ Stock Market LLC|
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐
Indicate by check mark whether the registrant has submitted electronically, every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐
Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See definition of "large accelerated filer," "accelerated filer," "smaller reporting company," and "emerging growth company" in Rule 12b-2 of the Exchange Act.
|Large accelerated filer|
|Smaller reporting company|
|Emerging growth company|
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management's assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒
The aggregate market value of the voting common equity held by non-affiliates of the Registrant as of June 30, 2021 was approximately $1.3 billion, based upon the closing sales price of the Registrant's common stock, $0.01 par value, reported for such date on the NASDAQ Global Select Market. For purposes of this calculation only, directors, executive officers and the principal controlling shareholder or entities controlled by such controlling shareholder are deemed to be affiliates of the Registrant.
As of February 22, 2022, the number of outstanding shares of the Registrant's common stock, $0.01 par value, was 42,835,700 shares.
Portions of the Registrant's Proxy Statement for the 2022 Annual Meeting of Stockholders are incorporated herein by reference in Part III of this Annual Report on Form 10-K to the extent stated herein.
TRIMAS CORPORATION INDEX
This report may contain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934 about our financial condition, results of operations and business. These forward-looking statements can be identified by the use of forward-looking words, such as “may,” “could,” “should,” “estimate,” “project,” “forecast,” “intend,” “expect,” “anticipate,” “believe,” “target,” “plan” or other comparable words, or by discussions of strategy that may involve risks and uncertainties.
These forward-looking statements are subject to numerous assumptions, risks and uncertainties which could materially affect our business, financial condition or future results including, but not limited to: the severity and duration of the ongoing coronavirus (“COVID-19”) pandemic on our operations, customers and suppliers, as well as related actions taken by governmental authorities and other third parties in response, each of which is uncertain, rapidly changing and difficult to predict; general economic and currency conditions; inflationary pressures on our supply chain, including raw material and energy costs, and customers; interest rate volatility; risks and uncertainties associated with intangible assets, including goodwill or other intangible asset impairment charges; competitive factors; future trends; our ability to realize our business strategies; our ability to identify attractive acquisition candidates, successfully integrate acquired operations or realize the intended benefits of such acquisitions; information technology and other cyber-related risks; the performance of our subcontractors and suppliers; supply constraints, including the availability and cost of raw materials; market demand; intellectual property factors; litigation; government and regulatory actions, including, without limitation, climate change legislation and other environmental regulations, as well as the impact of tariffs, quotas and surcharges; our leverage; liabilities imposed by our debt instruments; labor disputes and shortages; changes to fiscal and tax policies; contingent liabilities relating to acquisition activities; the disruption of operations from catastrophic or extraordinary events, including natural disasters and public health crises; the amount and timing of future dividends and/or share repurchases, which remain subject to Board approval and depend on market and other conditions; our future prospects; and other risks that are discussed in Part I, Item 1A, "Risk Factors." The risks described in this report are not the only risks facing our Company. Additional risks and uncertainties not currently known to us or that we currently deemed to be immaterial also may materially adversely affect our business, financial position and results of operations or cash flows.
The cautionary statements set forth above should be considered in connection with any subsequent written or oral forward-looking statements that we or persons acting on our behalf may issue. We caution readers not to place undue reliance on the statements, which speak only as of the date of this report. We do not undertake any obligation to review or confirm analysts' expectations or estimates or to release publicly any revisions to any forward-looking statement to reflect events or circumstances after the date of this report or to reflect the occurrence of unanticipated events, except as required by law.
We disclose important factors that could cause our actual results to differ materially from our expectations implied by our forward-looking statements under Part II, Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations," and elsewhere in this report. These cautionary statements qualify all forward-looking statements attributed to us or persons acting on our behalf. When we indicate that an event, condition or circumstance could or would have an adverse effect on us, we mean to include effects upon our business, financial and other conditions, results of operations, prospects and ability to service our debt.
Trademarks and Service Marks
We own or have rights to trademarks, service marks or trade names that we use in connection with the operation of our business. Solely for convenience, some of the copyrights, trademarks, service marks and trade names referred to in this Annual Report on Form 10-K are listed without the ©, ® and ™ symbols, but we will assert, to the fullest extent under applicable law, our rights to our copyrights, trademarks, service marks, trade names and domain names. The trademarks, service marks and trade names of other companies appearing in this Annual Report on Form 10-K are, to our knowledge, the property of their respective owners.
Item 1. Business
TriMas designs, develops and manufactures a diverse set of products primarily for the consumer products, aerospace and industrial markets through its TriMas Packaging, TriMas Aerospace and Specialty Products groups. We believe our businesses share important and distinguishing characteristics, including: well-recognized brand names in the focused markets we serve; innovative product technologies and features; customer approved processes and qualified products; strong cash flow conversion and long-term growth opportunities. Headquartered in Bloomfield Hills, Michigan, TriMas has approximately 3,500 employees who serve our customers from 38 manufacturing and support locations in twelve countries.
During 2021, our net sales were $857.1 million, operating profit was $95.1 million, and net cash provided by operating activities was $134.2 million. Approximately 70% of our 2021 net sales were generated from sales into North America.
Our Competitive Strengths
TriMas reports its operating activities in three segments: Packaging, Aerospace and Specialty Products. Our management team believes TriMas is uniquely positioned because of a number of competitive strengths, including:
•Well-Recognized and Established Brands. Our main brands include Rieke®, Affaba & Ferrari™, Taplast™, Rapak® and Omega Plastics (reported in Packaging); TriMas Aerospace™, Monogram Aerospace Fasteners™, Allfast Fastening Systems®, Mac Fasteners™, RSA Engineered Products, Martinic Engineering™ and TFI Aerospace (reported in Aerospace); and Norris Cylinder™ and Arrow® Engine Company (reported in Specialty Products). We believe each of our go-to-market brands are well-recognized and firmly established in the focused markets we serve. We believe our brands represent high standards and a commitment to quality and service that our customers rely on, and in many cases certify or audit, when they make their sourcing decisions.
•Innovative and Proprietary Manufacturing and Product Technologies. We believe each of our businesses is well-positioned through years of refined manufacturing know-how, innovative product development, application engineering and solutions design. We believe our manufacturing footprint and operational competencies would be difficult and costly to replicate, providing us an advantage. We continue to place a priority on investing in innovation to protect and enhance our product designs, brand names, and manufacturing processes and competencies.
•Customer-Focused Solutions and Long-Term Customer Relationships. We work collaboratively with our customers to design new product applications that help satisfy rapidly changing preferences in the marketplace. As a recognized leader in many of our markets, customers partner with us during the design, product development and production life cycle. These ongoing relationships, often developed over decades, coupled with our expertise in innovation and application engineering, position us to win new and replacement business with our customers when they launch new products or programs.
•Experienced Management Team. Given the range of product and process technologies within each of our businesses, TriMas' success is a function of our experienced management team. In each of our businesses, including businesses we have acquired, we have members of our leadership team that have served the vast majority of their careers, and have extensive and often times unique experience, in the industries we operate. The TriMas management team is focused and committed to continuously improving Company performance and growing shareholder value. Management compensation is tied to financial results through short-term incentive plans, long-term equity incentive programs and Company-established stock ownership guidelines.
Guided by our experienced management team, we are focused on the following components that comprise our core strategy:
•Leverage the TriMas Business Model. The TriMas Business Model ("TBM") serves as the platform to manage our diverse set of businesses under a common set of standards focused on driving long-term exceptional performance. Through the TBM, we set near- and long-term performance objectives and goals, and utilize a reliable communication and escalation process that provides for flexibility and adjustments if market expectations change. A key tenet of the TBM is our commitment to operational excellence and continuous improvement. We leverage the Kaizen methodology, which is predicated on engaging our employees to identify cost effective ways to improve all aspects of our businesses, throughout our manufacturing operations and support services. We believe our operating performance will continue to benefit from the use of Kaizen as a means to drive our decision-making and investment processes. In addition to continuous improvement and goal setting, the TBM is also focused on environmental, health and safety, talent development, and flawless new product and process launches.
•Accelerate Growth through Innovation. We continue to invest in organic growth in our most compelling market segments with the highest long-term return potential. We intend to leverage our brands, expand our product offerings to current and new customers, and introduce innovative products to meet our customers' needs and help solve their challenges. We operate under a disciplined approach to defend and expand our product offerings, and grow our business over the longer term. In addition to product innovation, we also value process innovation and believe we can solidify our customer relationships using new innovative processes and manufacturing "know-how" to improve our quality, speed to develop and commercialize, sustainability and overall competitiveness, increasing customer satisfaction, as well as our performance.
•Augment Growth with Strategic Acquisitions. We believe TriMas, through its relatively low debt profile and its strong free cash flow, is uniquely positioned to enhance organic growth with strategic acquisitions. Our acquisition priority is to build out the Packaging platform, continuing our initiative to increase TriMas’ weight in packaging-related end markets, which comprise more than 60% of consolidated net sales in 2021, as well as explore opportunities to further expand our Aerospace platform. We typically seek to acquire adjacent product lines that expand our existing product offerings, gain access to new customers and end markets, expand our geographic footprint and/or capitalize on scale and cost efficiencies.
•Drive Enhanced Cash Conversion. We leverage the TBM to drive management’s decision-making processes to achieve our growth and profitability targets, as well as drive our businesses toward achieving market-leading returns and cash flow conversion. We believe establishing well-defined strategies, executing against annual goals and long-range targets, operating in a data-driven, fact-based environment, and awarding our team on annual cash flow generation will allow us to expand our free cash flow and create shareholder value. We plan to use this cash for reinvestment in our businesses, strategic acquisitions and other capital allocation actions, such as share buybacks and dividends, which we initiated in 2021.
•Engage our People. We believe our talented and dedicated global team is the foundation of our success. We strive to be a great employer through our demonstrated commitment to employee safety, diversity, equity and inclusion, talent development and workplace culture. We embrace the tools of Kaizen and foster a culture of employee engagement to drive performance improvements, operational excellence and a sustainable future.
•Focus on Sustainability in Everything We Do. We view sustainability and Environmental, Social and Governance ("ESG") practices as important components of our culture and rooted in our core values representing who we are as a company. We proactively seek new ways to make progress in each of the four key areas of our sustainability strategy: Governance & Ethics, People, Environment and Products. We believe that sustainability is broader than caring for the environment, and encompasses care for our employees, as well as the communities where we live and work. It means continuously enhancing our products and our processes to make the world a better place. We strive to incorporate the concept of sustainability into our decision-making model, and continue to increase the importance of sustainability in everything we do.
We report the results of our operations in three segments, which had net sales and operating profit for the year ended December 31, 2021 as follows: Packaging (net sales: $533.3 million; operating profit: $96.5 million), Aerospace (net sales: $183.3 million; operating profit: $13.3 million) and Specialty Products (net sales: $140.5 million; operating profit: $22.6 million). For information pertaining to the net sales and operating profit attributed to our segments, refer to Note 22, "Segment Information," included in Item 8, "Financial Statements and Supplementary Data," within this Form 10-K.
Each of our segments is described in more detail on the following pages.
Packaging (62% of 2021 net sales)
TriMas' Packaging segment consists of TriMas Packaging, which includes the Rieke, Affaba & Ferrari, Taplast, Rapak and Omega Plastics brands. We believe TriMas Packaging is a leading designer, developer and manufacturer of specialty, highly-engineered polymeric and steel closure and dispensing systems for a range of end markets, including consumer packaging and industrial markets. We manufacture high-performance, value-added products that are designed to enhance our customers’ ability to store, transport, process and dispense various products.
TriMas Packaging designs and manufactures dispensing products (including foaming pumps, lotion and hand soap pumps, sanitizer pumps, beverage dispensers, perfume sprayers, nasal sprayers and trigger sprayers), polymeric and steel caps and closures (including food lids, flip-top closures, child resistance caps, drum and pail closures and flexible spouts), polymeric jar products, and fully integrated dispensers for fill-ready, flexible bag-in-box applications, for a variety of consumer product markets including, but not limited to, beauty and personal care, home care, food and beverage, medical, pharmaceutical and nutraceutical, as well as industrial markets.
In December 2021, we acquired Omega Plastics, a manufacturer of custom injection molded components and devices for drug delivery, diagnostic and orthopedic medical applications, as well as various injection molded products for industrial products. Omega Plastics adds rapid prototyping and advanced in-house tool making capabilities to enhance our speed-to-market advantage for innovative new product designs, as well as an ISO13485-certified injection molding facility and an ISO Class 8 clean room.
In April 2020, we acquired the Rapak brand of flexible bag-in-box product lines and assets used in dairy, soda, smoothie and wine applications. In December 2020, we acquired Affaba & Ferrari Srl, a highly-automated manufacturer of aseptic closures for energetic, juice and dairy drinks, as well as industrial closures and flex spouts, in December.
TriMas Packaging has the capability of manufacturing the majority of our products in North America, Europe or Asia, which allows us to evaluate manufacturing location decisions based on customer needs, timing, cost and capacity.
We believe TriMas Packaging benefits from the following competitive strengths in coordination with operating under TriMas' overarching strategy:
•Strong Product Innovation. Through a multi-layered approach to product and process innovation starting with subject matter experts, our TriMas Packaging team is focused on driving innovation across a broad range of solutions for our customers. Our New Product Development teams are also supported by our Engineering Resource Center ("ERC"), located in India, to enhance our technical innovation and development. TriMas Packaging has a consistent pipeline of new products ready for launch and continues to innovate to make products more sustainable and environmentally friendly. For example, TriMas Packaging's product development programs have provided innovative and proprietary product solutions, such as the patented single-polymer MonoTM-2e pump, which features six parts, all made from one material, making it 100% recyclable. We are also developing additional dispensing products made from a single-material without compromising quality, aesthetics, performance or formula compatibility, under the SingoloTM brand. In addition, TriMas Packaging partnered with Amazon to develop a range of products designed to meet the requirements of the high-growth e-commerce retail channel, including a proprietary dispenser locking mechanism to protect the integrity of packages and prevent liquids from leaking during shipment, meeting consumers' demands and ISTA 6 standards as required by Amazon. TriMas Packaging's emphasis on highly-engineered solutions and product development has yielded numerous issued and enforceable patents, with many other patent applications pending. For example, 44 patents were filed and 64 patents were issued in 2021, related to both new and existing patent families.
•Customized Solutions that Enhance Customer Relationships. A significant portion of our products have customized designs that are developed and engineered to address customer-specific technical, marketing and sustainability needs, helping to distinguish our customers’ products from those of their competitors. For example, the customization of specialty plastic caps, closures and dispensers including branding, unique colors, collar sizes, lining and venting results in substantial customer loyalty. The substantial investment in flexible manufacturing cells allows us to offer both short lead-times for high volume products and customization for more moderate volume orders, which provides significant advantages to our consumer packaged goods customer base. In addition, we provide customized dispensing solutions including unique pump designs, precision metering, unique colors and special collar sizes to fit the customer’s containers. TriMas Packaging collaborates with customers to develop innovative products that are more eco-friendly and easier to recycle. We have also been successful in promoting the sale of complementary products in an effort to achieve preferred supplier status with several customers.
•Global Manufacturing Footprint. TriMas Packaging maintains a global network of sales, manufacturing and distribution sites, to serve our global customer base. Our customers, including larger consumer products customers, often desire supply capability and a manufacturing footprint close to their end markets which results in more efficient supply chains, reduced carbon footprint and better sustainability. In light of recent market forces that impact logistics, we are expanding our North American manufacturing presence by launching a new, highly automated facility in New Albany, Ohio, which will be operational in 2022. This new facility will enable TriMas Packaging to shift production of a variety of products currently produced outside of the United States and provide significant incremental capacity for new business growth closer to our customers in North America as needed. To serve our customers in Asia, we have design and manufacturing capacity and offer highly engineered dispensing solutions through locations in China, India and Vietnam, and have increased our Asian market sales coverage. Additionally, TriMas Packaging opened a facility in San Miguel de Allende, Mexico, during 2017, to provide incremental manufacturing capacity to support our growth in North America. We have also increased our sales coverage in Europe and Asia. Our acquisitions of Affaba & Ferrari in 2020, and Plastic Srl and Taplast in 2019, provide us with additional sales, design and manufacturing capacity in Europe, with additional manufacturing facilities in Italy and Slovakia. In addition, we are starting to expand into South America, opening our first warehouse in Brazil for planned commercial activity beginning in 2022. We believe TriMas Packaging's flexible footprint provides us with multiple alternatives for production to best meet customer requirements and helps mitigate the impacts of potential trade disruption. The majority of TriMas Packaging's manufacturing facilities around the world have advanced injection molding machines required to manufacture precision engineered dispensing and closure components, as well as automated, high-speed assembly equipment for multi-component products.
Marketing, Customers and Distribution
TriMas Packaging accesses its markets through direct sales to end-use customers, as well as through leading distributors, where it has enjoyed favorable, long-standing relationships. We employ commercial teams in North America, Europe and Asia, organized by product line and combined with a Global Strategic Accounts sales team, led by a chief commercial officer. We also at times use third-party agents and distributors in key geographic markets, including Europe, South America and Asia, as well as agents and distributors primarily to sell to container manufacturers and to users or fillers of containers.
TriMas Packaging's end customers include, but are not limited to, consumer packaged goods, beauty and cosmetic, personal care, medical, pharmaceutical, nutraceutical, food and beverage, industrial, agricultural, chemical, and cleaning and sanitary supply companies. We also provide products into applications used by warehouse clubs, e-retailers and fast food retailers. We may provide products directly to the end customer, but the end customers may also specify that our products be provided to fillers or packagers. In addition, we also provide products to major container manufacturers, and maintain a customer service center that provides technical support, as well as other technical assistance to customers.
TriMas Packaging has manufacturing and support facilities in the United States, Mexico, the United Kingdom, Germany, Italy, Slovakia, China, India and Vietnam.
TriMas Packaging has a broad range of products in closure, dispensing and flexible packaging systems, and therefore has various competitors in each of our product offerings. We do not believe that there is a single competitor that matches our entire product offering. Depending on the product and customers served, our competitors include Aptar, Bericap, Berry Global, Greif, Mold-Rite, Phoenix Closures, Silgan, Technocraft and other smaller private companies located in Asia.
Aerospace (22% of 2021 net sales)
Our Aerospace segment is comprised of TriMas Aerospace, which includes the Monogram Aerospace Fasteners, Allfast Fastening Systems, Mac Fasteners, RSA Engineered Products, Martinic Engineering and TFI Aerospace brands. We believe TriMas Aerospace is a leading designer and manufacturer of a diverse range of products, including, but not limited to, highly-engineered fasteners, collars, blind bolts, rivets, ducting and connectors for air management systems, and other highly-engineered machined parts and components, for use in focused markets within the aerospace industry. In general, these products are customer-specific and are manufactured utilizing customer-qualified and proprietary processes. The products also satisfy rigorous customer approvals or meet unique aerospace industry standards, and as such, we believe there are a limited set of competitors.
We provide products for commercial, business jet, and military and defense aerospace applications and platforms with sales to original equipment manufacturers ("OEMs"), supply chain distributors, MRO/aftermarket providers and tier one suppliers. Our customer-specified and/or qualified products are used in production of significant long-term aircraft programs, including several Boeing and Airbus commercial jetliner programs.
We believe our brands are well established and recognized in their markets. Each of our brands are long-term, certified suppliers of aerospace OEMs or Tier 1 suppliers, and have been serving the aerospace industry for decades. Our TriMas Aerospace go-to-market fastener brands include Monogram Aerospace Fasteners (“Monogram”), Allfast Fastening Systems (“Allfast”), Mac Fasteners and TFI Aerospace (“TFI”), and our engineered product brands include RSA Engineered Products ("RSA") and Martinic Engineering ("Martinic").
TriMas Aerospace's product offering includes a broad line of fastener products, including permanent threaded blind bolts, solid and blind rivets, standard screws and bolts manufactured to meet NAS, MS, AN and AS standards, collars, temporary fasteners and other specialty fasteners. TriMas Aerospace also manufactures and assembles complex, highly-engineered and proprietary ducting, connectors and related products for air management systems, and other complex machine-to-print parts for aerospace applications, including auxiliary power units, as well as electrical, hydraulic and pneumatic systems. In December 2021, we acquired TFI, a manufacturer and supplier of specialty fasteners used in a variety of applications, predominantly for the aerospace end market.
We believe TriMas Aerospace benefits from the following competitive strengths in coordination with operating under TriMas' overarching strategy:
•Broad Product Portfolio of Established Brands. We believe that TriMas Aerospace is a leading designer, developer and manufacturer of broad range of engineered fasteners for the aerospace industry, as well as other complex machined components such as those used in air ducting systems. The combination of the Monogram, Allfast, Mac Fasteners and TFI brands enables TriMas Aerospace to offer a wide range of fastener products which address a broad scope of customer requirements, providing scale to customers who continue to rationalize their supply base. In several of the product categories, including rotary-actuated blind bolts and blind and solid rivets, TriMas Aerospace has a meaningful market share with well-known and established brands. The combined product sets of the Monogram, Allfast, Mac Fasteners and TFI brands uniquely position us to benefit from platform-wide supply opportunities. In addition, RSA has extensive experience in providing air ducting, connectors and flexible joints used in hot engine bleed air, anti-icing and environmental control system applications. Martinic has a reputation, with more than 40 years of experience, of specializing in the high complexity machining of castings, forgings and bar stock for leading tier-one commercial and defense aerospace OEMs.
•Product Innovation. We believe that TriMas Aerospace’s engineering, research and development capability and new product focus are competitive advantages. For many years, TriMas Aerospace’s product development programs have provided innovative and proprietary product solutions. The close working relationship between our sales and engineering teams and our customers’ engineering teams is key to developing future products desired and required by our customers. Our innovation teams add value by working directly with our customers to address assembly and manufacturing process challenges to increase productivity, quality, speed and efficiency, while reducing overall installed cost. TriMas Aerospace has developed new fastener products that offer a flush break upon installation and is developing and testing other fastener designs which offer improved clamping characteristics on composite structures, improved aerodynamics and enhanced installed aesthetics. One of our recent product innovations is the Composi-Lok4® fastener evolution, providing significant installed weight savings, helping to improve fuel efficiency. TriMas Aerospace has also designed the next generation temporary fastener with a significant increase in clamping force called Fastack® SC (Super Clamp). TriMas Aerospace has also expanded its fastener offerings to include other fastening product applications on current aircraft, including the expansion of its suite of collar families used in traditional two-sided assembly. We believe our customer-focused approach to provide cost-effective technical solutions will drive the development of new products and create new opportunities for growth.
•Leading Manufacturing Capabilities and Processes. We believe that TriMas Aerospace is a leading manufacturer of precision-engineered components for the aerospace industry. Given industry regulatory requirements, as well as customer requirements, these products are required to be manufactured within tight tolerances and specifications, often out of hard-to-work-with and exotic materials including titanium, Inconel and specialty steels. TriMas Aerospace is also capable of advanced precision computer numerical controlled ("CNC") milling, high performance CNC turning and assembly, working in a variety of metals including super alloys, stainless steel, aircraft steel alloys, carbon steel alloys and aluminum alloys. Many of TriMas Aerospace’s products, facilities and manufacturing processes are required to be qualified and/or certified. Key certifications in TriMas Aerospace include: AS9100:2009 Revision D; ISO9001:2008; TSO; and NADCAP for non-destructive testing, heat treatment, wet processes and materials testing. While proprietary products and patents are important, having proprietary manufacturing processes and capabilities makes TriMas Aerospace’s products difficult to replicate. The aerospace industry has strict requirements for quality and delivery, making process innovation and continuous improvement vital to TriMas Aerospace's success. We believe TriMas Aerospace’s manufacturing processes, capabilities and quality focus create a competitive strength for the business.
Marketing, Customers and Distribution
TriMas Aerospace serves both OEM and aftermarket customers on a wide variety of platforms. Given the focused nature of many of our products, TriMas Aerospace relies upon a global sales and technical team that is knowledgeable of both OEM customers and the established network of independent distributors. Although the markets for fasteners are highly competitive, we provide products and services primarily for specialized applications, and compete principally on technology, quality and service. TriMas Aerospace works directly with aircraft manufacturers to develop and test new products and improve existing products. TriMas Aerospace’s primary customers include OEMs, supply chain distributors, tier one suppliers and the United States government.
TriMas Aerospace's manufacturing facilities are located in the United States and Canada. In addition to TriMas Aerospace's facilities in California, we are also ramping up a new facility in Mesa, Arizona. Given the nature of the components TriMas Aerospace manufactures, it can ship products efficiently to Europe, South America and Asia.
Depending on the product and customers served, our primary competitors include Ateliers de la Haute Garonne, Cherry Aerospace - Precision Castparts Corp., Howmet Aerospace, LISI Aerospace and Senior Aerospace, as well as a variety of aerospace and general industrial machined component manufacturers. We believe that we are a leader in the blind bolt market with significant market share in all blind fastener product categories in which we compete.
Specialty Products (16% of 2021 net sales)
Our Specialty Products segment is comprised of our Norris Cylinder and Arrow Engine Company businesses. We believe these businesses are well established and recognized in the end markets they serve.
TriMas' Norris Cylinder business is a leading designer, manufacturer and distributor of highly-engineered steel cylinders for use in industrial, heating, ventilation and air conditioning ("HVAC"), construction, health care and defense end markets. We believe that Norris Cylinder is a leading provider of a complete line of large, intermediate and small size, high and low-pressure steel cylinders for the transportation, storage and dispensing of compressed gases. Norris Cylinder’s large high-pressure seamless gas cylinders are used principally for shipping, storing and dispensing oxygen, nitrogen, argon, helium and other compressed gases. In addition, Norris Cylinder offers a complete line of steel cylinders used to contain and dispense acetylene gas for the welding and cutting industries. Norris Cylinder's products meet the rigorous standards required by the Department of Transportation ("DOT") or International Standards Organization ("ISO"), which certifies a cylinder's adequacy to perform in specific applications.
Arrow Engine is a provider of natural gas powered wellhead engines, compressors and replacement parts, all engineered for use in oil and natural gas production and other industrial and commercial markets. As Arrow's engines can operate from the natural gas produced at the wellhead, we believe Arrow is uniquely positioned to provide its products for remote pump jack installations. Arrow Engine distributes its products through a worldwide distribution network, primarily focused in the United States and Canada. Arrow Engine manufactures its own engine line and also offers a wide variety of spare parts for various industrial engines not manufactured by Arrow Engine.
We believe our Specialty Products segment benefits from the following competitive strengths in coordination with operating under TriMas' overarching strategy:
•Leading Market Positions and Strong Brand Names. With more than 70 years of experience, Norris Cylinder is one of the worlds' largest manufacturers of high- and low-pressure steel cylinders, and the only manufacturer in the United States. In 2021, Norris Cylinder became an official “Made in the USA” designated manufacturer, which we believe allows Norris to locally address customers' needs, while maintaining more control over lead times and quality. We believe that Norris has a reputation for high-quality cylinders used in a variety of applications, including industrial gas, welding and cutting, government, medical, laboratories, food and beverage technology, breathing air, fire protection and aviation. We believe that Arrow Engine also has also a leading market position in the niche it serves.
•Comprehensive Product Offering. We believe that both Norris Cylinder and Arrow Engine offer a comprehensive product offering that meets their customers' needs. Norris Cylinder offers a complete line of large, intermediate and small size, high and low-pressure steel cylinders to its customers across a variety of end markets. Arrow Engine also provides a comprehensive product offering, including engines, compressors, chemical pumps, generator sets, electronics and replacement parts to a variety of oilfield and industrial markets. During 2021, utilizing the tools of Kaizen, Arrow Engine developed and launched a new reduced emission EPA-certified A54-E engine platform for stationary and off-road mobile applications.
•Established and Extensive Distribution Channels. Our Specialty Products businesses have long-standing customer relationships and distributes directly to major companies, as well as distributing to domestic buying groups, OEMs, medium and small independent companies, and independent distributors. Our long-standing supply positions in this well-established network has allowed our Specialty Products businesses to successfully navigate some of the most robust, as well as harshest, economic cycles.
•Difficult and Costly to Replicate Manufacturing Base. Our Norris Cylinder business has locations in Longview, Texas, and Huntsville, Alabama, which have numerous forging and metalworking pieces of equipment and processes. While there are other manufacturers of steel cylinders globally, the installation of manufacturing processes and adding new capacity tends to be a lengthy process and a costly investment to implement. As such, in periods of rising demand, as we have experienced in 2021, Norris Cylinder's installed capacity and manufacturing presence in the United States provides an advantage when compared to non-U.S. suppliers dealing with logistic constraints.
Marketing, Customers and Distribution
The customers of our Specialty Products segment predominantly operate in the industrial end markets, and to a lesser extent, the upstream oil and gas end markets. Given the focused nature of many of our products, we rely upon a combination of a direct sales force and an established network of distributors with familiarity of the end-users. Norris Cylinder, for example, sells directly to customers and through distributors. Our primary customers include industrial gas producers and distributors, welding equipment distributors, and equipment manufacturers.
The Norris Cylinder and Arrow Engine manufacturing facilities are located in the United States.
Norris Cylinder competes against Worthington, Beijing Tianhai Industry Co., Faber and Vitkovice Cylinders, but is the only steel cylinder manufacturer in the United States. In May 2012, the U.S. International Trade Commission made a unanimous final determination that Norris Cylinder had been materially injured by imports of DOT high-pressure steel cylinders that were being subsidized by the Government of China, as well as being dumped in the U.S. market by producers in China. As a result, trade duties were imposed on the subject imports for a five-year period to create a fairer competitive environment in the United States. The duty was extended and increased for an additional five-year period in 2017. Arrow Engine tends to compete against natural gas powered, lower horsepower, multi-cylinder engines from manufacturers such as Caterpillar, Chevy, Cummins and Ford industrial engines and electric motors.
TriMas' Acquisition Strategy
TriMas views the pursuit of strategic acquisitions as core to augmenting its growth and achieving its overarching corporate strategy. We believe TriMas is uniquely positioned to leverage its relatively low debt profile and its strong free cash flow profile to identify and complete bolt-on acquisitions annually as part of its capital allocation philosophy. TriMas’ acquisition priority is to build out our Packaging platform, continuing our initiative to increase TriMas’ weight in packaging-related end markets, which currently comprises nearly 65% of consolidated net sales, as well as explore unique opportunities to build out our Aerospace platform. We typically seek to acquire adjacent product lines that expand our existing product offerings, gain access to new customers and end markets, expand our geographic footprint and/or capitalize on scale and cost efficiencies. Since the beginning of 2019, TriMas has completed seven acquisitions and one divestiture.
Materials and Supply Arrangements
Our largest raw material purchases are for resins (such as polypropylene and polyethylene), steel, aluminum and other oil and metal-based purchased components. Raw materials and other supplies used in our operations are normally available from a variety of competing suppliers. In addition to raw materials, we purchase a variety of components and finished products from sources in lower-cost countries.
Polypropylene and polyethylene are generally commodity resins with multiple suppliers capable of providing product globally. Steel is purchased primarily from steel mills and service centers. Changing global dynamics for steel production and supply will continue to present a challenge to our business.
Historically, we have experienced volatility in costs and availability of our raw material purchases and have worked with our suppliers to manage costs and disruptions in supply. We also utilize pricing programs to pass increased steel, resin and other raw material costs to customers. Although we may experience delays in our ability to implement price increases, we have been generally able to recover such increased costs.
Human Capital Resources
As of December 31, 2021, we employed approximately 3,500 people, of which approximately 52% were located outside the United States. We have one facility, located in Commerce, California where our hourly employees operate under a collective bargaining agreement, and which represents approximately 14% of our U.S. employees. We have four facilities outside of the United States where our employees are affiliated with state-controlled or trade unions, which covers approximately 47% of our non-U.S. employees.
We believe employee relations throughout our organization are good and we are not aware of any present active union organizing activities at any of our facilities. We cannot predict the impact of any further unionization of our workplace. Our labor agreement with the United Automobile, Aerospace and Agricultural Implement Workers of America at our TriMas Aerospace facility in Commerce, California expired in August 2021, at which time we entered into a new three-year collective bargaining agreement.
TriMas focuses on a number of human capital resources objectives in managing its business, including our commitment to health and safety, employee engagement, diversity, equity & inclusion, and talent development. These human capital resources objectives, taken together, may be material to understanding our business under certain circumstances. These objectives are reinforced by our Code of Conduct, our global policies, including our Global Human Rights Policy and our Diversity, Equity & Inclusion Statement, and our commitment to sustainability as evidenced by our Sustainability Reports.
Commitment to Safety
One of our primary objectives under the TBM is the health and safety of our employees and anyone who conducts business on our behalf. The commitment to safety starts at the top levels of our organization. We believe a safe and secure workplace is fundamental to our success. TriMas is committed to providing a safe and healthy workplace, and complying with applicable safety and health laws, regulations and internal requirements. We are also committed to engaging our employees to continually improve health and safety by acting upon opportunities to reduce risk and improve our safety and health performance, and offer training programs on a regular basis. TriMas maintains comprehensive safety programs focused on identifying hazards and eliminating risks that can lead to work-place injuries.
At TriMas, a commitment to continuous improvement is one of our core values and imperative to our long-term success. We embrace the tools of Kaizen and work to foster a culture of employee engagement to drive performance improvements and operational excellence. We believe that employee feedback is important which is why, in 2021, we administered an employee engagement survey globally. We will continue to work on our engagement as a company, with managers actively facilitating engagement discussions with their teams and developing action plans to ensure progress and continuous improvement.
Diversity, Equity and Inclusion
We believe we are at our best when we bring together unique perspectives, experiences and ideas, and actively build diverse teams and inclusive work environments across our global locations. We believe that tapping into our employees’ diverse backgrounds and experiences ensures we make better decisions and supports stronger operating performance. Our goal is to foster working environments that are fair, equitable and safe, where rights are respected and everyone can achieve their full potential. Our policies and practices strive to assure equal employment and advancement opportunities for all qualified people. We also work to maintain appropriate standards of conduct in the workplace and to be sensitive to the concerns of our diverse group of employees. We strive to maintain workplaces that are free from discrimination or harassment on the basis of race, ethnicity, color, national origin, religion, age, gender, gender identity and expression, genetic information, sexual orientation, protected veteran status, disability or any other characteristic protected by applicable laws.
We believe that a talented, engaged and dynamic workforce is vital to our success. We seek to hire, develop and retain individuals who embrace and thrive in our culture. Our culture is grounded in our values: Integrity, Customer-focused, Teamwork, Results-driven and Continuous Improvement. Our businesses strive to build robust talent pipelines through targeted recruitment initiatives across our global footprint. Our programs are intended to ensure seamless onboarding for our new employees. We identify and nurture talent through a culture that is designed to enable employees to succeed and grow into leadership positions. We believe that our diverse businesses and structure provide many opportunities for employees to follow their own path and advance their careers.
We support a culture of continuous development, and we provide employees with the opportunity to receive frequent performance feedback. On a regular basis throughout the year, employees have goal alignment, performance and career development discussions with their managers (via annual goal setting, mid-year and year-end performance and talent reviews). At these times, employees receive candid feedback on their performance against set objectives. These reviews evaluate each employee’s strengths, skills and areas for opportunity, which are important for career development.
TriMas does not experience significant seasonal fluctuation, other than our fourth quarter, which has tended to be the lowest net sales quarter of the year given holiday shutdowns by certain of our customers and other customers deferring capital spending to the following year.
We are subject to increasingly stringent environmental laws and regulations, including those relating to air emissions, wastewater discharges, and chemical and hazardous waste management and disposal. Some of these environmental laws hold owners or operators of land or businesses liable for their own and for previous owners' or operators' releases of hazardous or toxic substances or wastes. Other environmental laws and regulations require obtaining and complying with environmental permits. To date, costs of complying with environmental, health and safety requirements have not been material. However, the nature of our operations and our long history of industrial activities at certain of our current or former facilities, as well as those acquired, could potentially result in material environmental liabilities.
Current environmental laws and regulations have not had a material impact on our business, capital expenditures or financial position. However, we must comply with existing and pending climate change legislation, regulation and international treaties or accords. Future events, including those relating to climate change or greenhouse gas regulation could require us to incur expenses related to the modification or curtailment of operations, installation of pollution control equipment or investigation and cleanup of contaminated sites. In addition to environmental laws and regulations, our operations are governed by variety of laws and regulations, including those relating to workplace safety and worker health, principally the Occupational Safety and Health Act and regulations thereunder. We believe that we are in material compliance with these laws and regulations and do not believe that future compliance with such laws and regulations will have a material adverse effect on our business, financial condition, results of operations and cash flows.
Trade Policies and Regulations
Free trade laws and regulations provide certain duties and tariffs on qualifying imports and exports, subject to compliance with the applicable classification and other requirements. In the past few years, we have experienced higher input costs as a direct result of tariffs imposed on certain raw materials and components imported from China. In certain cases, we have passed-through these incremental costs to the customer, while in some cases we have not changed pricing to retain or expand volume, and in other cases we continue to work to install capacity in facilities where there currently is no tariff. In addition, certain of our U.S. suppliers raised prices for components in response to an overall increase in demand for domestic sources.
We believe that we are in material compliance with free trade laws and regulations. While there may be an impact to our financial condition as a result of changes in the amount of duties or tariffs levied on products we sell, we do not believe that costs to remain in compliance with such laws and regulations will have a material adverse effect on our business, financial condition, results of operations and cash flows.
Our identified intangible assets, consisting of customer relationships, trademarks and trade names, and technology, are recorded at approximately $196.7 million at December 31, 2021, net of accumulated amortization. The valuation of each of the identified intangibles was performed using broadly accepted valuation methodologies and techniques.
Customer Relationships. We have developed and maintained stable, long-term selling relationships with customer groups for specific branded products and/or focused market product offerings within each of our businesses. Useful lives assigned to customer relationship intangibles range from five to 25 years and have been estimated using historic customer retention and turnover data. Other factors considered in evaluating estimated useful lives include the diverse nature of focused markets and products of which we have significant share, how customers in these markets make purchases and these customers' position in the supply chain. We also monitor and evaluate the impact of other evolving risks including the threat of lower cost competitors and evolving technology.
Trademarks and Trade Names. Each of our businesses designs and manufactures products for focused markets under various trade names and trademarks (see prior discussion by reportable segment). Our trademark/trade name intangibles are well-established and considered long-lived assets that require maintenance through advertising and promotion expenditures. Because it is our practice and intent to maintain and to continue to support, develop and market these trademarks/trade names for the foreseeable future, we consider our rights in these trademarks/trade names to have an indefinite life, except as otherwise dictated by applicable law.
Technology. We hold a number of United States and foreign patents, patent applications, and proprietary product and process-oriented technologies within all three of our reportable segments. We have, and will continue to dedicate, technical resources toward the further development of our products and processes in order to maintain our competitive position in the industrial, commercial and consumer end markets that we serve. Estimated useful lives for our technology intangibles range from one to 30 years and are determined in part by any legal, regulatory or contractual provisions that limit useful life. For example, patent rights have a maximum limit of 20 years in the United States. Other factors considered include the expected use of the technology by the operating groups, the expected useful life of the product and/or product programs to which the technology relates, and the rate of technology adoption by the industry.
Approximately 25.3% of our net sales for the year ended December 31, 2021 were derived from sales by our businesses located outside of the United States, and approximately 37.1% of our long-lived assets as of December 31, 2021 were located outside of the United States. We operate manufacturing facilities in Canada, China, Germany, India, Italy, Mexico, Slovakia, the United Kingdom and Vietnam, in addition to our U.S. operations. In addition to the net sales derived from sales by our businesses located outside of the United States, we also generated approximately $80.6 million of export sales from the United States.
Website Access to Company Reports
We use our corporate website, www.trimascorp.com, as a channel for routine distribution of important information, including news releases, company presentations and links to our businesses' websites, as well as reinforcing our commitment to sustainability as evidenced by our Sustainability Reports. We also provide financial information on our website and post filings as soon as reasonably practicable after they are electronically filed with, or furnished to, the Securities and Exchange Commission ("SEC"), including our annual, quarterly, and current reports on Forms 10-K, 10-Q and 8-K, our proxy statements and any amendments to those reports or statements. All such postings and filings are available under our Investors section of the website free of charge. The SEC also maintains a website, www.sec.gov, that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC. The content on any website referred to in this Annual Report on Form 10-K is not incorporated by reference into this Annual Report on Form 10-K unless expressly noted.
Item 1A. Risk Factors
You should carefully consider each of the risks described below, together with information included elsewhere in this Annual Report on Form 10-K and other documents we file with the SEC. The risks and uncertainties described below are those that we have identified as material, but are not the only risks and uncertainties facing us. Although the risks are organized by headings, and each risk is discussed separately, many of the risks are interrelated. Readers should not interpret the disclosure of any risk factor to imply that the risk has not already materialized. Additional risks and uncertainties not currently known to us or that we currently believe are immaterial may also impact our business operations, financial results and liquidity.
Risks Relating to the COVID-19 Pandemic
The COVID-19 pandemic has had, and is expected to continue to have, a significant impact on the Company's operations and results.
Since late January 2020, we have been managing matters related to the global COVID-19 pandemic, including impacts to our operations and strategic supplier-partners in Asia, as well as our manufacturing operations in Europe and North America. We have experienced temporary disruptions in the operation of certain of our facilities due to elevated levels of absenteeism, which has impacted workforce staffing. In response, we were early adopters of many of the workplace guidelines published by the U.S. Centers for Disease Control and Prevention ("CDC") and implemented other precautionary measures as necessary to maintain social distancing. The COVID-19 pandemic has also affected our customers and suppliers, and we have been and will continue to collaborate with them to minimize supply chain disruptions. We have also implemented pandemic and business continuity plans, as well as other precautionary measures on behalf of our customers and employees, including supporting remote work opportunities for certain of our employees. While we believe that all of these measures have been necessary and appropriate, they have resulted in additional costs and may adversely impact our business and financial performance in the future or expose us to additional unknown risks.
The COVID-19 pandemic has impacted our results of operations, and we expect it will continue to impact us in the future at varying levels. For example, sales for our dispensing and closure products used to help fight the spread of gems continue to be much stronger than before the COVID-19 pandemic, while sales in our Aerospace segment have been lower than historical levels as a result of the reduction of new commercial aircraft builds. Although it is not possible to predict the ultimate impact of COVID-19, including on our business, results of operations, financial position or cash flows, such impacts that have been or may be material and include, but are not limited to: (i) shifting customer demand for many of our products, including those used in cosmetic, personal care, pharmaceutical, home care, food and beverage, and industrial markets, as well as aerospace markets; (ii) delays and disruptions in the availability of and timely delivery of materials and components used in our operations, as well as increased costs for such materials and components; (iii) reduced availability and productivity of employees, as well as increased costs associated with our high-deductible medical insurance plan if our employees become ill; (iv) increased operational risks as a result of manufacturing facility disruptions or remote work arrangements, including the potential effects on internal controls and procedures, as well as cybersecurity risks and increased vulnerability to security breaches, information technology disruptions and other similar events; (v) increased credit risk, including increased failure by customers experiencing business disruptions to make timely payments; (vi) customer requirements to accelerate the relocation of certain of our production lines to North America, which may increase our capital investment needs and launch costs; (vii) a negative impact on liquidity position; (viii) any impairment in value of tangible or intangible assets which could be recorded as a result of weaker economic conditions; and (ix) increased costs and less ability to access amounts available under our existing credit facility or more generally, access to and the availability of capital markets.
The extent of the COVID-19 pandemic's effect on our operational and financial performance will depend in large part on future developments, which cannot be predicted with confidence at this time. Future developments include the duration, scope and severity of the pandemic, the actions taken to contain or mitigate its impact, and the resumption of widespread economic activity, including air travel. The emergence of new variants of COVID-19, evolving governmental plans to institute vaccination mandates and limited availability of vaccines in various jurisdictions create uncertainty that may impact our employees and result in labor shortages and unforeseen costs. In addition, because we cannot predict the impact that COVID-19 will ultimately have, the actual impact may also exacerbate other risks discussed in this Item 1A.
Risks Relating to Our Business
Our businesses depend upon general economic conditions and we serve some customers in highly cyclical industries; as such, we may be subject to the loss of sales and margins due to an economic downturn or recession.
Our financial performance depends, in large part, on conditions in the markets that we serve in both the U.S. and globally. Although with the sale of our Lamons business ("Lamons") in December 2019 we significantly reduced our exposure to the oil and gas end market, we still are exposed to highly cyclical end markets for industrial goods (including our remaining exposure in oil and gas), and to a lesser extent, aerospace and consumer products. When combined with ongoing customer consolidation activity and periodic inventory reduction initiatives, an uncertain macro-economic and political climate could lead to reduced demand from our customers, variations in timing of sales to our customers, increased price competition for our products, increased risk of excess and obsolete inventories, uncollectible receivables, and higher overhead costs as a percentage of revenue, all of which could impact our operating margins. If our customers are adversely affected by these factors, we may experience lower product volume orders, which could have an unfavorable impact on our revenue and operating profit. Our ability to precisely forecast the level of our customers’ orders is limited and can result in inefficiencies in scheduling our installed manufacturing capacity and result in sub-optimal business and financial results.
Many of the markets we serve are highly competitive, which could limit sales volumes and reduce our operating margins.
Many of our products are sold in competitive markets. We believe that the principal points of competition in our markets are price, product quality, delivery performance, design and engineering capabilities, product development, conformity to customer specifications, customer service and effectiveness of distribution. Maintaining and improving our competitive position will require continued investment by us in manufacturing, engineering, quality standards, marketing, customer service and support of our distribution networks. We may have insufficient resources in the future to continue to make such investments and, even if we make such investments, we may not be able to maintain or improve our competitive position. We also face the risk of lower-cost manufacturers located in China, India and other regions competing in the markets for our products and we may be driven as a consequence of this competition to increase our investment overseas. Making overseas investments can be highly complicated and we may not always realize the advantages we anticipate from any such investments. Competitive pressure may limit the volume of products that we sell and reduce our operating margins.
We may be unable to successfully implement our business strategies and achieve our strategic and financial objectives.
We have a long history of acquisitions and divestitures, and we continuously evaluate strategic opportunities and other investment activities. From time to time, we may engage in one or more strategic transactions. If we do so, it may or may not meet the intended strategic or financial objective.
Strategic acquisitions may require integration expense and actions that may negatively affect our results of operations and that could not have been fully anticipated beforehand. In addition, attractive strategic transaction opportunities may not be identified or pursued in the future, financing for strategic transactions may be unavailable on satisfactory terms and we may be unable to accomplish our strategic objectives in effecting a particular strategic transaction. We may encounter various risks in pursuing such strategic transactions, including the possible inability to integrate an acquired business into our operations, increased expenses, increased debt obligations to finance such strategic transactions and unanticipated problems or liabilities.
In addition, we may dispose of assets or businesses at a price or on terms that are less favorable than we had anticipated, or with the exclusion of assets that must be divested or run off separately. As we seek to sell or separate certain assets, equity interests or businesses, we may also encounter difficulty in finding buyers, managing interdependencies across multiple transactions and other Company initiatives, implementing separation plans or executing alternative exit strategies on acceptable terms, which could delay or prevent the accomplishment of our strategic and financial objectives. Moreover, the effect of dispositions over time will reduce our cash flow and earnings capacity and result in a less diversified portfolio of businesses, and we will have a greater dependency on remaining businesses for our financial results.
Accordingly, risks related to strategic acquisitions or dispositions may result in the disruption of our ongoing business, diversion of management’s attention, the failure of such transactions to be completed, or the failure to realize the financial and strategic benefits contemplated at the time of a transaction, some or all of which could materially and adversely affect our business strategy, financial condition and results of operations.
We have significant goodwill and intangible assets, and future impairment of our goodwill and intangible assets could have a material negative impact on our financial results.
At December 31, 2021, our goodwill and intangible assets were approximately $512.2 million and represented approximately 39.3% of our total assets. If we experience declines in sales and operating profit or do not meet our current and forecasted operating budget, we may be subject to goodwill and/or other intangible asset impairments in the future. While the fair value of our remaining goodwill exceeds its carrying value, significantly worse financial performance of our businesses, significantly different assumptions regarding future performance of our businesses or significant declines in our stock price could result in future impairment losses. Because of the significance of our goodwill and intangible assets, and based on the magnitude of historical impairment charges, any future impairment of these assets could have a material adverse effect on our financial results.
Increases in our raw material or energy costs or the loss of critical suppliers could adversely affect our profitability and other financial results.
We are sensitive to price movements in our raw materials supply base. Our largest material purchases are for resins (such as polypropylene and polyethylene), steel, aluminum and other oil and metal-based purchased components. Prices for these products, along with costs for transportation and energy, fluctuate with market conditions, and have generally increased over time. For example, during 2021, commodity costs related to certain types of resins significantly increased from prior years, and we estimate that we incurred approximately $11 million more in cost increases than we were able to recover via commercial actions. We may be unable to offset the impact with price increases on a timely basis due to outstanding commitments to our customers, competitive considerations or our customers’ resistance to accepting such price increases and our financial performance could be adversely impacted. A failure by our suppliers to continue to supply us with certain raw materials, component parts, or at all, could have a material adverse effect on us. To the extent there are energy supply disruptions or material fluctuations in energy costs, our margins could be materially adversely impacted.
Our business may be exposed to risks associated with an increasingly concentrated customer base.
While no individual customer accounted for 10% or more of our consolidated net sales for 2021, 2020 or 2019, our customer base has become, and may further become, increasingly concentrated as a result of our strategy to focus on grow sales with existing customers in packaging end markets, or due to customer consolidations. In 2021, our Aerospace and Specialty Products segments each had customers that comprised 10% or more of its segment revenue. As a result of these factors, changes to or reductions in the buying patterns of these larger customers may expose our business and results of operations to greater volatility. For example, prior to the outbreak of COVID-19, a large commercial aircraft manufacturer announced significant production delays and/or reductions on certain of its platforms for which we provide products, which has impacted our sales, profit and production efficiencies compared with historical levels.
The mix and type of customers, and sales to any single customer, may vary significantly from quarter to quarter and from year to year, and have a significant impact on our financial condition, results of operations and cash flows. If customers do not place orders, or they substantially reduce, delay or cancel orders, we may not be able to replace the business, which may have a significant adverse impact on our results of operations and financial condition. Major customers may require that we localize manufacturing and supply capacity rather than sourcing from lower cost countries, or seek pricing, payment, intellectual property-related, or other commercial terms that are less favorable to us, which may have a negative impact on our business. The concentration of our customer base also increases our risks related to the financial condition of our customers, and the deterioration in financial condition of customers or the failure of customers to perform their obligations could have a material adverse effect on our results of operations and cash flows.
We are dependent on our manufacturing facilities for the production of our highly engineered products, which subjects us to risks associated with disruptions and changing technology and manufacturing techniques that could place us at a competitive disadvantage.
If our manufacturing facilities become unavailable either temporarily or permanently due weather, earthquakes or other natural disasters related to global climate change, or geopolitical developments or logistical complications arising from acts of war, cyber-attacks, public health crises or labor disruptions, we may be unable to shift production to other facilities or to make up for lost production. For example, our Aerospace manufacturing facilities are predominately located in southern California, an area known for earthquakes, and are thus vulnerable to damage. Any new facility would need to comply with the necessary regulatory requirements, satisfy our specialized manufacturing requirements and require specialized equipment. Even though we carry business interruption insurance policies, any business interruption losses could exceed the coverage available or be excluded from our insurance policies. Any disruption of our ability to operate our business could result in a material decrease in our revenues or significant additional costs to replace, repair or insure our assets, which could have a material adverse impact on our financial condition and results of operations.
In addition, we believe that our customers rigorously evaluate their suppliers on the basis of price competitiveness, product quality, reliability and timeliness of delivery, technical expertise and development capability, new product innovation, product design capability, manufacturing expertise, operational flexibility, customer service and overall management. Our success depends on our ability to continue to meet our customers’ changing expectations with respect to these criteria. We may be unable to install, maintain and certify equipment needed to produce products or upgrade or transition our manufacturing facilities without impacting production rates or requiring other operational efficiency measures at our facilities. We anticipate that we will remain committed to product research and development, advanced manufacturing techniques and service to remain competitive, which entails significant costs; however, we may be unable to address technological advances, implement new and more cost-effective manufacturing techniques, or introduce new or improved products, whether in existing or new markets, so as to maintain our businesses’ competitive positions or to grow our businesses as desired.
A major failure of our information systems could harm our business; increased IT security threats and more sophisticated and targeted computer crime could pose a risk to our systems, networks, and products.
We depend on integrated information systems to conduct our business. While we maintain some of our critical information systems, we are also dependent on third parties to provide important services relating to, among other things, operational technology at our facilities, human resources, electronic communications and certain finance functions. We may experience operating problems with our information systems as a result of system failures, viruses, computer hackers or other causes. Any significant disruption or slowdown of our systems could cause customers to cancel orders or cause standard business processes to become inefficient or ineffective.
We have experienced cyber-attacks in the past and, while none of these cyber-attacks resulted in a material disruption to our business, we may experience additional cyber-attacks in the future. Increased global IT security threats and more sophisticated and targeted computer crime pose a risk to the security of our systems and networks and the confidentiality, availability and integrity of our data and communications. While we attempt to mitigate these risks by employing a number of measures, including employee training, comprehensive monitoring of our networks and systems, and maintenance of backup and protective systems, our networks and systems remain potentially vulnerable to advanced persistent threats. Furthermore, we may have little or no oversight with respect to security measures employed by third-party service providers, which may ultimately prove to be ineffective at countering threats. Depending on their nature and scope, such threats could potentially lead to the compromising of confidential information and communications, improper use of our systems and networks, manipulation and destruction of data, defective products, production downtimes and operational disruptions, which in turn could adversely affect our reputation, competitiveness and results of operations.
Our ability to deliver products that satisfy customer requirements is dependent on the performance of our subcontractors and suppliers, as well as on the availability of raw materials and other components.
We rely on other companies, including subcontractors and suppliers, to provide and produce raw materials, integrated components and sub-assemblies and production commodities included in, or used in the production of, our products. If one or more of our suppliers or subcontractors experiences delivery delays or other performance problems, we may be unable to meet commitments to our customers or incur additional costs and penalties. In some instances, we depend upon a single source of supply. During 2021, we experienced many supply chain delays and inconsistencies with our subcontractors and suppliers as a result of the ongoing COVID-19 pandemic, resulting in labor and manufacturing inefficiencies given the challenges in production scheduling. Any material service disruption from one of these suppliers, either due to circumstances beyond the supplier’s control, such as geopolitical developments or logistical complications due to weather, global climate change, earthquakes or other natural disasters, or as a result of performance problems or financial difficulties, could have a material adverse effect on our ability to meet commitments to our customers or increase our operating costs.
A growing portion of our sales and earnings may be derived from international sources, which exposes us to certain risks which may adversely affect our financial results and impact our ability to service debt.
We have operations outside of the United States. Approximately 25.3% of our net sales for the year ended December 31, 2021 were derived from sales by our subsidiaries located outside of the U.S. In addition, we may expand our international operations through internal growth or acquisitions. International operations, particularly sales to emerging markets and manufacturing in non-U.S. countries, are subject to risks that are not present within U.S. markets, which include, but are not limited to, the following:
•volatility of currency exchange between the U.S. dollar and currencies in international markets;
•changes in local government regulations and policies including, but not limited to, foreign currency exchange controls or monetary policy, governmental embargoes, repatriation of earnings, expropriation of property, duty or tariff restrictions, investment limitations and tax policies;
•political and economic instability and disruptions, including labor unrest, civil strife, public health crises (including viral outbreaks such as the coronavirus), acts of war, guerrilla activities, insurrection and terrorism;
•legislation that regulates the use of chemicals;
•disadvantages of competing against companies from countries that are not subject to U.S. laws and regulations, including the Foreign Corrupt Practices Act ("FCPA");
•compliance with international trade laws and regulations, including export control and economic sanctions, such as anti-dumping duties;
•difficulties in staffing and managing multi-national operations;
•limitations on our ability to enforce legal rights and remedies;
•tax inefficiencies in repatriating cash flow from non-U.S. subsidiaries that could affect our financial results and reduce our ability to service debt;
•reduced protection of intellectual property rights; and
•other risks arising out of foreign sovereignty over the areas where our operations are conducted.
In addition, we could be adversely affected by violations of the FCPA and similar worldwide anti-bribery laws as well as export controls and economic sanction laws. The FCPA and similar anti-bribery laws in other jurisdictions generally prohibit companies and their intermediaries from making improper payments to non-U.S. officials for the purpose of obtaining or retaining business.
Our acquisition and disposition agreements by which we have acquired or sold companies, include indemnification provisions that may not fully protect us and may result in unexpected liabilities.
Certain of the agreements related to the acquisition and disposition of businesses require indemnification against certain liabilities related to the operations of the company for the previous owner. We cannot be assured that any of these indemnification provisions will fully protect us, and as a result we may incur unexpected liabilities that adversely affect our profitability and financial position.
We could be negatively impacted by stakeholder and market focus on ESG matters.
There has been an increasing focus on corporate ESG practices and disclosures over the past few years, and expectations in this area are rapidly evolving. We have announced certain areas of focus, which include health and safety, environmental matters, diversity, equity and inclusion, talent development, and innovation for sustainable products. The criteria used to evaluate ESG practices may continue to evolve, which could result in greater expectations and may cause us to undertake costly initiatives to satisfy new criteria. The increasing attention to sustainability could also result in reduced demand for certain of our products and/or reduced profits. If we are unable to respond effectively, investors may conclude that our ESG policies and/or actions are inadequate. If we are perceived to have failed to achieve our ESG initiatives or accurately disclose our progress on such matters, our reputation, business, financial condition and results of operations could be adversely impacted.
Regulatory, Legal and Environmental Risks
Significant developments from the recent and potential changes in U.S. trade policies could have a material adverse effect on us and our financial condition and results of operations.
Free trade laws and regulations provide certain duties and tariffs on qualifying imports and exports, subject to compliance with the applicable classification and other requirements. The United States government has indicated its intent to alter its approach to international trade policy and in some cases to renegotiate, or potentially terminate, certain existing bilateral or multi-lateral trade agreements and treaties with foreign countries. For example, beginning in October 2018, the U.S. government implemented additional tariffs on certain goods imported from China. These tariffs, and other governmental actions relating to international trade agreements or policies, the adoption and expansion of trade restrictions, or the occurrence of a trade war may adversely impact demand for our products, costs, customers, suppliers and/or the U.S. economy or certain sectors thereof and, as a result, adversely impact our business. These tariffs and actions may, directly or indirectly, lead to higher costs and cause us to increase prices to our customers which may reduce demand, or, if we are unable to increase prices, result in lowering our margin on products sold. For example, in the past few years, we have experienced higher input costs as a direct result of tariffs imposed on certain raw materials and components imported from China. In certain cases, we have passed-through these incremental costs to the customer, while in some cases we have not changed pricing to retain or expand volume, and in other cases we continue to work to install capacity in facilities where there currently is no tariff. In addition, certain of our U.S. suppliers raised prices for components in response to an overall increase in demand for domestic sources. It remains unclear what the U.S. or foreign governments will or will not do with respect to tariffs, international trade agreements and policies on a short-term or long-term basis. Additional changes in laws or policies governing the terms of foreign trade, and in particular increased trade restrictions, tariffs or taxes on imports from countries where we manufacture or purchase products could have a material adverse effect on our business and financial results.
Compliance with and changes in tax laws, including tax reform legislation in the United States, could materially and adversely impact our financial condition, results of operations and cash flows.
We are subject to extensive tax liabilities, including federal, state and foreign income taxes and transactional taxes such as excise, sales and use, payroll, franchise, withholding and property taxes. Many tax liabilities are subject to periodic audits by taxing authorities, and such audits could subject us to additional tax as well as interest and penalties. New tax laws and regulations and changes in existing tax laws and regulations could result in increased expenditures by us for tax liabilities in the future and could materially and adversely impact our financial condition, results of operations and cash flows.
We may face liability associated with the use of products for which patent ownership or other intellectual property rights are claimed.
We may be subject to claims or inquiries regarding alleged unauthorized use of a third party’s intellectual property. An adverse outcome in any intellectual property litigation could subject us to significant liabilities to third parties, require us to license technology or other intellectual property rights from others, require us to comply with injunctions to cease marketing or using certain products or brands, or require us to redesign, re-engineer, or re-brand certain products or packaging, any of which could affect our business, financial condition and operating results. If we are required to seek licenses under patents or other intellectual property rights of others, we may not be able to acquire these licenses on acceptable terms, if at all. In addition, the cost of responding to an intellectual property infringement claim, in terms of legal fees and expenses and the diversion of management resources, whether or not the claim is valid, could have a material adverse effect on our business, results of operations and financial condition.
We may be unable to adequately protect our intellectual property.
While we believe that our patents, trademarks, know-how and other intellectual property have significant value, it is uncertain that this intellectual property or any intellectual property acquired or developed by us in the future, will provide a meaningful competitive advantage. Our patents or pending applications may be challenged, invalidated or circumvented by competitors or rights granted thereunder may not provide meaningful proprietary protection. Moreover, competitors may infringe on our patents or successfully avoid them through design innovation. Policing unauthorized use of our intellectual property is difficult and expensive, and we may not be able to, or have the resources to, prevent misappropriation of our proprietary rights, particularly in countries where the laws may not protect such rights as fully as in the U.S. The cost of protecting our intellectual property may be significant and have a material adverse effect on our financial condition and future results of operations.
We may incur material losses and costs as a result of product liability, recall and warranty claims brought against us.
We are, from time to time, subject to a variety of claims or litigation incidental to our businesses, including demands for damages arising out of use of our products, claims relating to intellectual property matters and claims involving employment matters and commercial disputes. We currently carry insurance and maintain reserves for potential product liability claims. However, our insurance coverage may be inadequate if such claims do arise and any liability not covered by insurance could have a material adverse effect on our business. Although we have been able to obtain insurance in amounts we believe to be appropriate to cover such liability to date, our insurance premiums may increase in the future as a consequence of conditions in the insurance business generally or our situation in particular. Any such increase could result in lower operating profit or cause the need to reduce our insurance coverage. In addition, a future claim may be brought against us that could have a material adverse effect on us. Any product liability claim may also include the imposition of punitive damages, the award of which, pursuant to certain state laws, may not be covered by insurance. Our product liability insurance policies have limits that, if exceeded, may result in material costs that could have an adverse effect on our future profitability. In addition, warranty claims are generally not covered by our product liability insurance. Further, any product liability or warranty issues may adversely affect our reputation as a manufacturer of high-quality, safe products, divert management’s attention, and could have a material adverse effect on our business.
In addition, our former Lamons business is a party to lawsuits related to asbestos contained in gaskets formerly manufactured by it or its predecessors. While we sold the Lamons business in December 2019, we retained the asbestos-related liability exposure. Some of this litigation includes claims for punitive and consequential as well as compensatory damages. We are not able to predict the outcome of these matters given that, among other things, claims may be initially made in jurisdictions without specifying the amount sought or by simply stating the minimum or maximum permissible monetary relief, and may be amended to alter the amount sought. Of the 4,754 claims pending at December 31, 2021, 27 set forth specific amounts of damages (other than those stating the statutory minimum or maximum). See Note 17, "Commitments and Contingencies," included in Item 8, "Financial Statements and Supplementary Data," within this Form 10-K for additional information.
Total settlement costs (exclusive of defense costs) for all such cases, some of which were filed over 25 years ago, have been approximately $10.6 million. All relief sought in the asbestos cases is monetary in nature. To date, approximately 40% of our costs related to settlement and defense of asbestos litigation have been covered by our primary insurance. Effective February 14, 2006, we entered into a coverage-in-place agreement with our first level excess carriers regarding the coverage to be provided to us for asbestos-related claims when the primary insurance is exhausted. The coverage-in-place agreement makes asbestos defense costs and indemnity insurance coverage available to us that might otherwise be disputed by the carriers and provides a methodology for the administration of such expenses. The Company's primary insurance exhausted in November 2018, and the Company is solely responsible for defense costs and indemnity payments prior to the commencement of coverage under this agreement, the duration of which would be subject to the scope of damage awards and settlements paid. During this period, we may incur significant litigation costs in defending these matters. We also may be required to incur additional defense costs and pay damage awards or settlements or become subject to equitable remedies in the future that could adversely affect our businesses.
Our business may be materially and adversely affected by compliance obligations and liabilities under environmental laws and regulations, including related to climate change.
We are subject to increasingly stringent environmental laws and regulations, including those relating to air emissions, wastewater discharges and chemical and hazardous waste management and disposal. A number of governments or governmental bodies have introduced or are contemplating introducing regulatory changes in response to climate change, including regulating greenhouse gas emissions. Some of these laws hold owners or operators of land or businesses liable for their own and for previous owners’ or operators’ releases of hazardous or toxic substances or wastes. Other environmental laws and regulations require obtaining and complying with environmental permits. To date, costs of complying with environmental, health and safety requirements have not been material. However, the nature of our operations and our long history of industrial activities at certain of our current or former facilities, as well as those acquired, could potentially result in material liabilities.
While we must comply with existing and pending climate change legislation, regulation and international treaties or accords, current laws and regulations have not had a material impact on our business, capital expenditures or financial position. Future events, including those relating to climate change or greenhouse gas regulation, could require us to incur expenses related to fund energy efficiency activities, fees or restrictions on certain activities, the modification or curtailment of operations, installation of pollution control equipment or investigation and cleanup of contaminated sites. Any adopted future regulations could also negatively impact our ability to compete with companies situated in areas not subject to such limitations, and we may not be able to recover the cost of compliance with new or more stringent laws and regulations, which could adversely impact our results of operations, cash flow or financial condition.
Our reputation, ability to do business, and results of operations may be impaired by legal compliance risks.
While we strive to maintain high standards, our internal controls and compliance systems may not always protect us from acts committed by our employees, agents, or business partners that would violate U.S. and/or non-U.S. laws or adequately protect our confidential information, including the laws governing payments to government officials, bribery, fraud, anti-kickback and false claims rules, competition, export and import compliance, money laundering, and data privacy laws, as well as the improper use of proprietary information or social media. Any such allegations, violations of law or improper actions could subject us to civil or criminal investigations in the U.S. and in other jurisdictions, could lead to substantial civil or criminal, monetary and non-monetary penalties, and related shareholder lawsuits, could lead to increased costs of compliance, could damage our reputation and could have a material effect on our financial statements.
Risks Related to our Debt and Other Financial Obligations
We have debt principal and interest payment requirements that may restrict our future operations and impair our ability to meet our obligations.
As of December 31, 2021, we have approximately $393.8 million of outstanding long-term debt. We are subject to variable interest rates on our revolving credit facility. Such interest rates are based on the London Interbank Offered Rate ("LIBOR") plus 1.50%. We may experience increases in our interest expense as a result of general increases in interest rate levels. In addition, we could be further impacted by changes in variable interest rates. Although we have amended our credit facility to utilize the Secured Overnight Financing Rate ("SOFR") beginning in 2022, SOFR has a limited history and may perform differently from U.S. dollar LIBOR, which may affect our net interest expense and require changes to our future risk, pricing and hedging strategies. We had no amounts outstanding under our revolving credit facility as of December 31, 2021.
Our degree of leverage and level of interest expense may have important consequences, including:
•should our leverage increase, it may place us at a competitive disadvantage as compared with our less leveraged competitors and make us more vulnerable in the event of a downturn in general economic conditions or in any of our businesses;
•our flexibility in planning for, or reacting to, changes in our businesses and the industries in which we operate may be limited;
•a substantial portion of our cash flow from operations will be dedicated to the payment of annual interest and future principal obligations on our indebtedness, thereby reducing the funds available to us for operations, capital expenditures, acquisitions, future business opportunities or obligations to pay rent in respect of our operating leases; and
•our operations are restricted by our debt instruments, which contain certain financial and operating covenants, and those restrictions may limit, among other things, our ability to borrow money in the future for working capital, capital expenditures, acquisitions, rent expense or other purposes.
Our ability to service our debt and other obligations will depend on our future operating performance, which will be affected by prevailing economic conditions and financial, business and other factors, many of which are beyond our control. Our business may not generate sufficient cash flow, and future financings may not be available to provide sufficient net proceeds, to meet these obligations or to successfully execute our business strategies. See "Management's Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources."
Restrictions in our debt instruments limit our ability to take certain actions and breaches thereof could impair our liquidity.
Our revolving credit facility and the indenture governing our senior notes contain covenants that restrict our ability to:
•pay dividends or redeem or repurchase capital stock;
•incur additional indebtedness and grant liens;
•make acquisitions and joint venture investments; and
Our debt instruments also require us to comply with financial covenants relating to, among other things, interest coverage and leverage. We may not be able to satisfy these covenants in the future or be able to pursue our strategies within the constraints of these covenants. Substantially all of the assets of our domestic subsidiaries are pledged as collateral. Borrowings under the foreign currency sub limit are secured by a pledge of the assets of the foreign subsidiary borrowers that are party to our revolving credit facility. A breach of a covenant contained in our debt instruments could result in an event of default under one or more of our debt instruments and our lease financing arrangements. Such breaches would permit the lenders to declare all amounts borrowed thereunder to be due and payable, and the commitments of such lenders to make further extensions of credit could be terminated. Each of these circumstances could materially and adversely impair our liquidity.
Our borrowing costs may be impacted by our credit ratings developed by various rating agencies.
Two major ratings agencies, Standard & Poor’s and Moody’s, evaluate our credit profile on an ongoing basis and have each assigned ratings for our long-term debt. If our credit ratings were to decline, our ability to access certain financial markets may become limited, the perception of us in the view of our customers, suppliers and security holders may worsen and as a result, we may be adversely affected.
We have significant operating lease obligations and our failure to meet those obligations could adversely affect our financial condition.
We lease many of our manufacturing and distribution branch facilities, and certain capital equipment. Our rental expense in 2021 under these operating leases was approximately $11.0 million. A failure to pay our rental obligations would constitute a default allowing the applicable landlord to pursue any remedy available to it under applicable law, which would include taking possession of our property and, in the case of real property, evicting us. These leases are categorized as operating leases and are not considered indebtedness for purposes of our debt instruments.
Human Capital Risks
We depend on the services of key individuals and relationships, the loss of which could materially harm us.
Our success will depend, in part, on the efforts of our key leadership, including key operational, technical, commercial, manufacturing and financial personnel. Our business leadership teams have served a vast majority of their careers in, and are deeply experienced in, the industries we operate. Our future success will also depend on, among other factors, our ability to retain or attract other qualified personnel. The loss of the services of any of our key employees or the failure to retain or attract employees could have a material adverse effect on us.
We may be subject to further unionization and work stoppages at our facilities or our customers may be subject to work stoppages, which could seriously impact the profitability of our business.
As of December 31, 2021, we have one facility, located in Commerce, California, where our hourly employees operate under a collective bargaining agreement, and which represents approximately 14% of our employees located in the United States. We have four facilities outside of the United States where our employees are affiliated with state-controlled or trade unions, which covers approximately 47% of our non-U.S. employees. Our labor agreement with the United Automobile, Aerospace and Agricultural Implement Workers of America at our TriMas Aerospace facility in Commerce, California, expired in August 2021, at which time we entered into a new three-year collective bargaining agreement. We are not aware of any present active union organizing drives at any of our other facilities. We cannot predict the impact of any further unionization of our workplace.
Many of our direct or indirect customers have unionized work forces. Strikes, work stoppages or slowdowns experienced by these customers or their suppliers could result in slowdowns or closures of assembly plants where our products are utilized. In addition, organizations responsible for shipping our customers' products may be impacted by occasional strikes or other activity. Any interruption in delivery of our customers' products may reduce demand for our products and have a material adverse effect on us.
Healthcare costs for active employees may exceed projections and may negatively affect our financial results.
We maintain a range of healthcare benefits for our active employees pursuant to labor contracts and otherwise. Healthcare benefits for active employees are provided through comprehensive hospital, surgical and major medical benefit provisions or through health maintenance organizations, all of which are subject to various cost-sharing features. Some of these benefits are provided for in fixed amounts negotiated in labor contracts with the respective unions. If our costs under our benefit programs for active employees exceed our projections, our business and financial results could be materially adversely affected. Additionally, foreign competitors and many domestic competitors provide fewer benefits to their employees, and this difference in cost could adversely impact our competitive position.
Item 1B. Unresolved Staff Comments
Item 2. Properties
Our principal manufacturing facilities range in size from approximately 10,000 square feet to approximately 255,000 square feet. Except as set forth in the table below, all of our manufacturing facilities are owned. The leases for our manufacturing facilities have terms that expire from 2022 through 2032 and are generally renewable, at our option, for various terms, provided that we are not in default under the lease agreements. Substantially all of our owned U.S. real properties are subject to liens in connection with our credit facility. TriMas' corporate executive office is located in Bloomfield Hills, Michigan, which is leased through February 2028. Our buildings have been generally well maintained, are in good operating condition and are adequate for current production requirements.
The following list sets forth the location of our principal owned and leased manufacturing and other facilities used in continuing operations and identifies the principal segment utilizing such facilities as of December 31, 2021:
City of Industry
Borgo San Giovanni(1)
San Miguel de Allende(1)
Thu Dau Mot(1)
(1)Represents a leased facility. All such leases are operating leases.
Item 3. Legal Proceedings
See Note 17, "Commitments and Contingencies" included in Item 8, "Financial Statements and Supplementary Data," within this Form 10-K.
Item 4. Mine Safety Disclosures
Supplementary Item. Information about our Executive Officers
As of December 31, 2021, the following were executive officers of the Company:
Thomas A. Amato. Mr. Amato, age 58, was appointed the Company's president and chief executive officer in July 2016. Previously, he served as chief executive officer and president of Metaldyne, LLC, an international engineered products manufacturing company, from 2009 through 2015, and co-president and chief integration officer of Metaldyne Performance Group, a global manufacturing company formed in mid-2014 and taken public in the same year, from August 2014 through December 2015. Prior to 2009, he served as chairman, chief executive officer, and president of Metaldyne Corporation, a global components manufacturer, and co-chief executive officer of Asahi Tec, a publicly traded Japanese casting and forging company. Prior to this, Mr. Amato worked at MascoTech in positions of increasing responsibility, and successfully completed several acquisitions and divestitures. During this time, one of his roles was vice president of corporate development for TriMas. From 1987 to 1994, Mr. Amato worked at Imperial Chemical Industries, a large multinational chemical company, as an applications development engineer and, eventually, a group leader. Mr. Amato also serves on the Board of Directors of Ametek, a publicly traded diversified industrial manufacturing company, and is appointed as its Compensation Committee Chair.
Scott A. Mell. Mr. Mell, age 50, was appointed the Company’s chief financial officer in May 2021. Prior to joining the Company, Mr. Mell served as managing director of recovery and transformation services for Riveron, a national business advisory firm, from October 2018 through April 2021. In his role with Riveron, Mr. Mell led projects at TriMas to support continuous improvement efforts within TriMas’ Packaging and Aerospace segments. Mr. Mell has more than 25 years of leadership experience providing strategic, financial and operational advisory services focused on value creation and transformational change management. Prior to Riveron, Mr. Mell served as managing director at Ernst & Young from October 2017 to October 2018. Mr. Mell also served as Vice President of Corporate Strategy at Motus Integrated Technologies from January 2017 to October 2017. Mr. Mell has held senior leadership positions within several global consulting firms including McKinsey & Company and AlixPartners. Mr. Mell’s previous experience also includes serving in multiple C-Suite roles for both public and privately held companies in the industrial manufacturing, aerospace and energy industries.
Fabio L. Matheus Salik. Mr. Salik, age 53, was appointed president of TriMas Packaging in July 2020. He has more than 20 years of global management experience working for a variety of plastic packaging companies. From 2012 to 2020, he worked for Logoplaste, a Carlyle Group-owned company which is headquartered in Portugal. In his last assignment as CEO of Americas from July 2017 to May 2020, and as Chief Operating Officer from December 2016 to July 2017, Mr. Salik had full P&L responsibility for more than 20 facilities, servicing blue-chip consumer packaged goods companies including P&G, Nestle, L’Oreal, Dannon, Reckitt Benckiser and Henkel. Prior to his tenure at Logoplaste, he was president of Valmari, a Brazilian skincare company. He also worked for Rexam in the United States, France and Brazil, where he served in a number of roles of increasing responsibility, including positions like managing director worldwide for Rexam Make Up and managing director worldwide for Rexam Healthcare - Primary Packaging and Prescription Divisions.
John P. Schaefer. Mr. Schaefer, age 50, was appointed president of TriMas Aerospace in December 2016. Previously, he served in various strategic advisory capacities for private equity firms focused in the Aerospace & Defense industry. From 2010 through 2015, he served in operations and general management executive roles with TransDigm Group. Prior to his leadership roles at TransDigm, he served from 2005 through 2009 as an operating executive with Meggitt PLC. Mr. Schaefer is also a 22-year veteran and retired as a Lieutenant Colonel of the United States Marine Corps.
Item 5. Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Our common stock, par value $0.01 per share, is listed for trading on the NASDAQ Global Select Market under the symbol "TRS." As of February 22, 2022, there were 160 holders of record of our common stock.
In 2021 our Board of Directors declared the first dividend since our initial public offering in 2007. We declared dividends of $0.04 per share of common stock and we paid dividends of $1.7 million for the year ended December 31, 2021. Holders of common stock are entitled to dividends at the discretion of our Board of Directors.
See the discussion under Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources" and Note 20 to the Company's financial statements captioned "Earnings per Share," included in Item 8, "Financial Statements and Supplementary Data," within this Form 10-K.
The following graph compares the cumulative total stockholder return from December 31, 2016 through December 31, 2021 for TriMas common stock, the Russell 2000 Index and the S&P SmallCap 600 Capped Industrials Index. We have assumed that dividends have been reinvested and returns have been weighted-averaged based on market capitalization. The graph assumes that $100 was invested on December 31, 2016 in each of TriMas common stock, the stocks comprising the Russell 2000 Index and the stocks comprising the S&P SmallCap 600 Capped Industrials Index.
Issuer Purchases of Equity Securities
The following table provides information about purchases made by the Company, or on behalf of the Company by an affiliated purchaser, of shares of the Company's common stock during the three months ended December 31, 2021.
|Period||Total Number of Shares Purchased||Average Price Paid per Share|
Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs (1)
Approximate Dollar Value of Shares that May Yet Be Purchased Under the Program (1)
|October 1, 2021 to October 31, 2021||— ||$||— ||— ||$||143,540,446 |
|November 1, 2021 to November 30, 2021||25,000 ||$||35.61 ||25,000 ||$||142,650,103 |
|December 1, 2021 to December 31, 2021||1,000 ||$||34.75 ||1,000 ||$||142,615,349 |
|Total||26,000 ||$||35.58 ||26,000 ||$||142,615,349 |
(1) In March 2020, the Company announced its Board of Directors had authorized the Company to increase the purchase of its common stock up to $250 million in the aggregate from its previous authorization of $150 million. The increased authorization includes the value of shares already purchased under the previous authorization. Pursuant to this share repurchase program, during the three months ended December 31, 2021, the Company repurchased 26,000 shares of its common stock at a cost of approximately $0.9 million. The share repurchase program is effective and has no expiration date.
Item 6. Selected Financial Data
Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations
The statements in the discussion and analysis regarding industry outlook, our expectations regarding the performance of our business and the other non-historical statements in the discussion and analysis are forward-looking statements. These forward-looking statements are subject to numerous risks and uncertainties, including, but not limited to, the risks and uncertainties described in Item 1A "Risk Factors." Our actual results may differ materially from those contained in or implied by any forward-looking statements. You should read the following discussion together with Item 8, "Financial Statements and Supplementary Data."
TriMas designs, develops and manufactures a diverse set of products primarily for the consumer products, aerospace & defense and industrial markets through its TriMas Packaging, TriMas Aerospace and Specialty Products groups. Our wide range of innovative products are designed and engineered to solve application-specific challenges that our customers face. We believe our businesses share important and distinguishing characteristics, including: well-recognized and leading brand names in the focused markets we serve; innovative product technologies and features; a high-degree of customer approved processes and qualifications; established distribution networks; relatively low ongoing capital investment requirements; strong cash flow conversion and long-term growth opportunities. While the majority of our revenue is in the United States, we manufacture and supply products globally to a wide range of companies. We report our business activity in three segments: Packaging, Aerospace and Specialty Products.
Key Factors Affecting Our Reported Results
Our businesses and results of operations depend upon general economic conditions. We serve customers in industries that are highly competitive, cyclical and that may be significantly impacted by changes in economic or geopolitical conditions.
In March 2020, the President of the United States declared the coronavirus ("COVID-19") outbreak a national emergency, as the World Health Organization determined it was a pandemic. In response to the COVID-19 pandemic, federal, provincial, state, county and local governments and public health organizations or authorities around the world implemented a variety of measures intended to control the spread of the virus, including quarantines, "shelter-in-place" or "stay-at-home" and similar orders, travel restrictions, business curtailments and closures, social distancing, personal hygiene requirements, and other measures.
We have been, and continue to be, focused on making sure the working environments for our employees are safe so our operations have the ability to deliver the products needed to support efforts to mitigate the COVID-19 pandemic. Nearly all of our manufacturing sites have been deemed essential operations and remained open during the COVID-19 pandemic, at varying levels of capacity and efficiency, experiencing only temporary shutdowns due to country-specific government mandates or for thorough cleaning as a result of suspected COVID-19 cases. The health of our employees, and the ability of our facilities to remain operational in the current regulated environment, will be critical to our future results of operations.
Our divisions were impacted in 2020 at differing levels and times, beginning with our Asian facilities and strategic supply network, both primarily in China, in late January, followed by our European (primarily Italy) and North American facilities in February and March. We implemented new work rules and processes, which promote social distancing and increased hygiene to ensure the safety of our employees, particularly at our production facilities. These measures, while not easily quantifiable, have increased the level of manufacturing inefficiencies due to elevated levels of absenteeism, resulting in less efficient production scheduling and, in certain cases, short-term idling of production. We expect that we will continue to operate with these protocols in place for the foreseeable future.
Overall, 2021 net sales increased approximately $87.1 million, or 11.3%, compared to 2020, primarily as a result of increased industrial demand in our Specialty Products segment, acquisitions in our Packaging segment and the impact of customers' stocking orders within our Aerospace segment. These increases were partially offset by a decline in sales of our Packaging segment's dispensing and closure products that are used in applications to fight the spread of germs, which sales reached record-high levels in 2020 when there was a significant spike in demand following the onset of the COVID-19 pandemic, but now have abated to what we believe is a new, and higher, normalized level.
The most significant drivers affecting our results of operations in 2021 compared with 2020, other than as directly impacted by demand level changes as a result of the COVID-19 pandemic, were goodwill and intangible asset impairment charges in 2020 in our Aerospace segment, our election to change our accounting policy for asbestos-related defense costs in 2020, realignment actions we undertook in response to reduced end-market demand following the outbreak of the COVID-19 pandemic, the impact of our recent acquisitions, increases in the cost of certain raw materials, the refinancing of our long term debt in 2021 and the recognition of the benefit of certain tax planning strategies.
During 2020, we determined there was a triggering event requiring an interim quantitative impairment assessment for goodwill and indefinite-lived intangible assets within our Aerospace segment. While third quarter 2020 operating results were below pre-pandemic projected levels, the larger driver of the triggering event was a significant reduction in the July 2020 financial projection update for the remainder of 2020 compared with prior projections, and uncertainty around the duration and magnitude of the impact of the COVID-19 pandemic on future financial results given the dependence of our Aerospace segment reporting units on future levels of air travel and new aircraft builds. We determined the carrying value of both of our Aerospace reporting units, as well as of certain trade names, exceeded the fair value, resulting in non-cash, pre-tax impairment charges of approximately $126.8 million to goodwill and $7.8 million to indefinite lived intangible assets.
During 2020, we elected to change our accounting policy for asbestos-related defense costs from accruing for probable and reasonably estimable defense costs associated with known claims expected to settle to accruing for all future defense costs for both known and unknown claims, which we now believe can be reasonably estimated. This accounting change has been reflected as a change in accounting estimate effected by a change in accounting principle. We recorded a non-cash, pre-tax charge in second quarter 2020 for asbestos-related costs of approximately $23.4 million, which is included in selling, general and administrative expenses. In 2021, we commissioned our actuary to update the asbestos study based on data as of September 30, 2021, and recorded a non-cash, pre-tax charge of $1.5 million, which is included in selling, general and administrative expenses, to increase the liability estimate.
Beginning in second quarter 2020, we have been executing certain realignment actions in response to reductions in current and expected future end market demand following the onset of the COVID-19 pandemic. We recorded pre-tax facility consolidation and employee separation costs of approximately $3.5 million and $6.2 million, respectively, in 2021. In 2020, we recorded a pre-tax charge of approximately $13.8 million related to inventory reductions, primarily as a result of a strategic decision in our Arrow Engine division to streamline its product line offering. We also recorded charges of approximately $2.3 million related to certain production equipment removed from service given reduced demand levels, and employee separation costs of approximately $3.8 million.
In December 2021, we completed the acquisition of Omega Plastics ("Omega"), which specializes in manufacturing custom components and devices for drug delivery, diagnostic and orthopedic medical applications, as well as components for industrial applications, for an aggregate amount of approximately $22.5 million, net of cash acquired. Omega, which is reported in the Company's Packaging segment, is located in Clinton Township, Michigan. Omega contributed approximately $0.7 million of net sales during 2021.
In December 2021, we acquired TFI Aerospace ("TFI"), a manufacturer and supplier of specialty fasteners used in a variety of applications, predominately for the aerospace end market, for an aggregate amount of approximately $11.8 million, with additional contingent consideration ranging from zero to approximately $12.0 million to be paid based on 2023 and 2024 earnings per the purchase agreement. TFI, which is reported in the Company's Aerospace segment, is located near Toronto, Canada. TFI contributed approximately $0.3 million of net sales during 2021.
In December 2020, we completed the acquisition of Affaba & Ferrari Srl ("Affaba & Ferrari"), which specializes in the design, development and manufacture of precision caps and closures for food & beverage and industrial product applications, for an aggregate amount of approximately $98.4 million, net of cash acquired. Affaba & Ferrari, which is reported in our Packaging segment, operates out of a highly automated manufacturing facility and support office located in Borgo San Giovanni, Italy. Affaba & Ferrari contributed approximately $36.3 million of incremental net sales during 2021.
In April 2020, we acquired the Rapak brand, including certain bag-in-box product lines and assets ("Rapak") for an aggregate amount of approximately $11.4 million. Rapak, which is reported in our Packaging segment, has two manufacturing locations in the United States. Rapak contributed approximately $5.3 million of incremental net sales resulting from the January through March 2021 sales. Rapak has been performing below break-even operating profit as demand for its products, particularly those used in quick service restaurant applications, has significantly declined from pre-acquisition levels in 2019 due to the impact of the COVID-19 pandemic.
In February 2020, we completed the acquisition of RSA Engineered Products ("RSA"), a provider of highly-engineered and proprietary components for air management systems used in critical flight applications, for an aggregate amount of approximately $83.7 million, net of cash acquired. RSA, located in Simi Valley, California, designs, engineers and manufactures highly-engineered components, including air ducting products, connectors and flexible joints, predominantly used in aerospace and defense engine bleed air, anti-icing and environmental control system applications. RSA contributed approximately $4.3 million of incremental net sales resulting from January and February 2021 sales.
In first quarter 2021, we began experiencing an increase in material costs compared with 2020 levels, primarily for resin-based raw materials and components, as well as for certain types of steel. These material costs further increased throughout 2021. We have escalator/de-escalator clauses in our commercial contracts with certain of our customers, or can modify prices based on market conditions, and we have been taking actions to recover the increased cost of raw materials. However, given the lag nature of the commercial pricing mechanisms, we have and will continue to experience net earnings pressure until resin costs begin to stabilize and/or decline for several consecutive months. We estimate that due to the lag in timing between incurring the cost increases and recovering via commercial actions, our operating profit was negatively impacted by approximately $11 million in 2021, compared with 2020, primarily in our Packaging segment.
In 2021, we refinanced our long-term debt, issuing $400 million aggregate principal amount of 4.125% senior unsecured notes due April 15, 2029 ("2029 Senior Notes") at par value in a private placement under Rule 144A of the Securities Act of 1933, as amended, and amending our existing credit agreement ("Credit Agreement"), extending the maturity to March 2026. We used the proceeds from the 2029 Senior Notes offering to pay fees and expenses of approximately $5.1 million related to the offering and approximately $1.1 million related to amending the Credit Agreement. The remaining cash proceeds from the 2029 Senior Notes were used for general corporate purposes, including repaying all outstanding revolving credit facility borrowings and redeeming all of our outstanding senior notes due October 2025 ("2025 Senior Notes"), paying cash for the entire $300.0 million outstanding principal amount plus $7.3 million as a redemption premium. The $5.1 million of fees and expenses related to the 2029 Senior Notes were capitalized as debt issuance costs, while the $7.3 million redemption premium as well as approximately $3.0 million of unamortized debt issuance costs associated with the 2025 Senior Notes were expensed in 2021.
In addition, our effective tax rate for 2021 was 17.1%, compared to 22.3% for 2020. We recorded income tax expense of approximately $11.9 million in 2021, as compared to an income tax benefit of $23.0 million in 2020. During 2021, we reported domestic and foreign pre-tax income of approximately $28.4 and $40.7 million, respectively, as compared to a 2020 domestic pre-tax loss of approximately $134.6 million and foreign pre-tax income of approximately $31.9 million. The rate for 2021 includes the impact of income tax incentives in a foreign jurisdiction, the impact of certain non-deductible expenses and an increase in the statutory tax rate in another foreign jurisdiction which increased the value of certain deferred tax assets. The effective tax rate for 2020 was impacted by a decrease in profitability in the U.S. resulting from various one-time charges, including impairment of goodwill and indefinite-lived intangible assets and a change in our accounting policy for asbestos-related defense costs. During 2020, we also undertook certain tax-planning actions with respect to restructuring our intercompany debt, resulting in the recognition of a $6.4 million deferred tax benefit.
Additional Key Risks that May Affect Our Reported Results
We expect the COVID-19 pandemic will continue to impact us in the future at varying degrees. We expect the robust customer demand, compared with pre-pandemic demand levels, for our Packaging segment's dispensing pumps and closure products used in personal care and home care applications will continue, albeit with some reduction from the surge experienced in 2020 and early 2021, as we believe there is a positive secular trend focused on consumers' desire to stop the spread of germs and improve personal hygiene. Industrial demand in North America was lower in 2020 compared to previous levels, and while demand levels significantly increased in 2021, we are uncertain how and at what level demand will be impacted as governmental, travel or other restrictions are lifted, particularly in North America, where orders for our industrial cylinders, for example, are heavily influenced by the levels of construction and HVAC activity. We expect the aerospace market to continue to experience severe dislocation going forward, as except for the significant stocking orders for certain of our products received during 2021, our sales levels would be significantly lower than historical levels. With the current travel restrictions and sentiment, particularly low for international travel, aircraft manufacturers have slowed production, and since second quarter 2020 we have experienced a significant drop in aerospace-related sales related to new commercial airplane builds compared to prior levels. We expect, except as favorably impacted by the customers' stocking orders in 2021, lower levels of sales and related production to continue for the foreseeable future.
We have executed significant realignment actions since the onset of the COVID-19 pandemic, primarily in our Aerospace and Specialty Products segments, and also in certain Packaging product areas where demand has fallen, such as in the quick service and restaurant applications, to protect against the uncertain end market demand. We will continue to assess further actions if required. However, as a result of the COVID-19 pandemic's impact on global economic activity, and the continued potential impact to our future results of operations, as well if there is an impact to TriMas' market capitalization, we may record additional cash and non-cash charges related to incremental realignment actions, as well as for uncollectible customer account balances, excess inventory and idle production equipment.
Despite the potential decline in future demand levels and results of operations as a result of the COVID-19 pandemic, at present, we believe our capital structure is in a solid position. We have ample cash and available liquidity under our revolving credit facility to meet our debt service obligations, capital expenditure requirements and other short-term and long-term obligations for the foreseeable future.
The extent of the COVID-19 pandemic's effect on our operational and financial performance will depend in large part on future
developments, which cannot be predicted with confidence at this time. Future developments include the duration, scope and severity of the COVID-19 pandemic, the actions taken to contain or mitigate its impact, timing of widespread vaccine availability, and the resumption of normalized global economic activity. Due to the inherent uncertainty of the unprecedented and rapidly evolving situation, we are unable to predict with any confidence the likely impact of the COVID-19 pandemic on our future operations.
Beyond the unique risks presented by the COVID-19 pandemic, other critical factors affecting our ability to succeed include: our ability to create organic growth through product development, cross-selling and extending product-line offerings, and our ability to quickly and cost-effectively introduce and successfully launch new products; our ability to acquire and integrate companies or products that supplement existing product lines, add new distribution channels or customers, expand our geographic coverage or enable better absorption of overhead costs; our ability to manage our cost structure more efficiently via supply chain management, internal sourcing and/or purchasing of materials, selective outsourcing and/or purchasing of support functions, working capital management, and greater leverage of our administrative functions.
Our overall business does not experience significant seasonal fluctuation, other than our fourth quarter, which has tended to be the lowest net sales quarter of the year due to holiday shutdowns at certain customers or other customers deferring capital spending to the following year. Given the short-cycle nature of most of our businesses, we do not consider sales order backlog to be a material factor. A growing amount of our sales is derived from international sources, which exposes us to certain risks, including currency risks.
We are sensitive to price movements and availability of our raw materials supply. Our largest raw material purchases are for resins (such as polypropylene and polyethylene), steel, aluminum and other oil and metal-based purchased components. In addition to the factors affecting our 2021 results, there has been some volatility over the past two years as a direct and indirect result of foreign trade policy, where tariffs on certain of our commodity-based products sourced from Asia have been instituted, and certain North American suppliers have opportunistically increased their prices. We will continue to take actions to mitigate such increases, including implementing commercial pricing adjustments, resourcing to alternate suppliers and insourcing of previously sourced products to better leverage our global manufacturing footprint. Although we believe we are generally able to mitigate the impact of higher commodity costs over time, we may experience additional material costs and disruptions in supply in the future and may not be able to pass along higher costs to our customers in the form of price increases or otherwise mitigate the impacts to our operating results.
Although we have escalator/de-escalator clauses in commercial contracts with certain of our customers, or can modify prices based on market conditions to recover higher costs, our price increases generally lag the underlying material cost increase, and we cannot be assured of full cost recovery in the open market. If input costs increase at rapid rates, as they did during 2021, our ability to recover cost increases on a timely basis, much less at all, is made more difficult by the lag nature of these contracts.
Our Arrow Engine business in our Specialty Products segment is sensitive to the demand for natural gas and crude oil in North America. For example, demand for engine, pump jack and compressor products are impacted by active oil and gas rig counts and wellhead investment activities. Separately, oil-based commodity costs are a significant driver of raw materials and purchased components used within our Packaging segment.
Each year, as a core tenet of the TriMas Business Model, our businesses target cost savings from Kaizen and continuous improvement initiatives in an effort to reduce, or otherwise offset, the impact of increased input and conversion costs through increased throughput and yield rates, with a goal of at least covering inflationary and market cost increases. In addition, we continuously review our operating cost structures to ensure alignment with current market demand.
We continue to evaluate alternatives to redeploy the cash generated by our businesses, one of which includes returning capital to our shareholders. In 2020, our Board of Directors increased the authorization of share repurchases to a cumulative amount of $250 million. During 2021, we purchased 596,084 shares of our outstanding common stock for approximately $19.1 million. As of December 31, 2021, we had approximately $142.6 million remaining under the repurchase authorization.
In addition, in 2021 our Board of Directors declared the first dividend since our initial public offering in 2007. We declared dividends of $0.04 per share of common stock and we paid dividends of $1.7 million for the year ended December 31, 2021. We will continue to evaluate opportunities to return capital to shareholders through the purchase of our common stock as well as dividends, depending on market conditions and other factors.
Segment Information and Supplemental Analysis
The following table summarizes financial information for our three reportable segments (dollars in thousands):
| ||Year ended December 31,|
|2021||As a Percentage of Net Sales||2020||As a Percentage of Net Sales||2019||As a Percentage of Net Sales|
|Net Sales|| || || || || || |
|Packaging||$||533,260 ||62.2 ||%||$||488,340 ||63.4 ||%||$||392,340 ||54.2 ||%|
|Aerospace||183,340 ||21.4 ||%||167,740 ||21.8 ||%||194,110 ||26.8 ||%|
|Specialty Products||140,510 ||16.4 ||%||113,890 ||14.8 ||%||137,080 ||19.0 ||%|
|Total||$||857,110 ||100.0 ||%||$||769,970 ||100.0 ||%||$||723,530 ||100.0 ||%|
|Gross Profit|| || || |
|Packaging||$||145,750 ||27.3 ||%||$||142,410 ||29.2 ||%||$||116,180 ||29.6 ||%|
|Aerospace||39,970 ||21.8 ||%||27,020 ||16.1 ||%||53,060 ||27.3 ||%|
|Specialty Products||31,470 ||22.4 ||%||12,650 ||11.1 ||%||24,660 ||18.0 ||%|
|Total||$||217,190 ||25.3 ||%||$||182,080 ||23.6 ||%||$||193,900 ||26.8 ||%|
|Selling, General and Administrative|
|Packaging||$||49,110 ||9.2 ||%||$||47,850 ||9.8 ||%||$||35,340 ||9.0 ||%|
|Aerospace||26,690 ||14.6 ||%||25,550 ||15.2 ||%||24,070 ||12.4 ||%|
|Specialty Products||8,950 ||6.4 ||%||7,890 ||6.9 ||%||8,620 ||6.3 ||%|
|Corporate expenses||37,220 ||N/A||53,190 ||N/A||34,500 ||N/A|
|Total||$||121,970 ||14.2 ||%||$||134,480 ||17.5 ||%||$||102,530 ||14.2 ||%|
|Operating Profit (Loss)|
|Packaging||$||96,490 ||18.1 ||%||$||93,990 ||19.2 ||%||$||80,770 ||20.6 ||%|
|Aerospace||13,270 ||7.2 ||%||(133,440)||(79.6)||%||28,950 ||14.9 ||%|
|Specialty Products||22,550 ||16.0 ||%||4,350 ||3.8 ||%||16,000 ||11.7 ||%|
|Total||$||95,090 ||11.1 ||%||$||(88,290)||(11.5)||%||$||91,220 ||12.6 ||%|
|Packaging||$||34,080 ||6.4 ||%||$||30,730 ||6.3 ||%||$||16,400 ||4.2 ||%|
|Aerospace||5,390 ||2.9 ||%||5,770 ||3.4 ||%||8,110 ||4.2 ||%|
|Specialty Products||5,500 ||3.9 ||%||3,890 ||3.4 ||%||5,090 ||3.7 ||%|
|Corporate||90 ||N/A||90 ||N/A||70 ||N/A|
|Total||$||45,060 ||5.3 ||%||$||40,480 ||5.3 ||%||$||29,670 ||4.1 ||%|
|Packaging||$||20,950 ||3.9 ||%||$||18,330 ||3.8 ||%||$||15,070 ||3.8 ||%|
|Aerospace||7,140 ||3.9 ||%||7,110 ||4.2 ||%||6,560 ||3.4 ||%|
|Specialty Products||3,670 ||2.6 ||%||3,450 ||3.0 ||%||2,960 ||2.2 ||%|
|Corporate||130 ||N/A||130 ||N/A||280 ||N/A|
|Total||$||31,890 ||3.7 ||%||$||29,020 ||3.8 ||%||$||24,870 ||3.4 ||%|
|Packaging||$||9,550 ||1.8 ||%||$||9,270 ||1.9 ||%||$||9,580 ||2.4 ||%|
|Aerospace||11,560 ||6.3 ||%||11,020 ||6.6 ||%||8,530 ||4.4 ||%|
|Specialty Products||450 ||0.3 ||%||460 ||0.4 ||%||520 ||0.4 ||%|
|Corporate||— ||N/A||— ||N/A||— ||N/A|
|Total||$||21,560 ||2.5 ||%||$||20,750 ||2.7 ||%||$||18,630 ||2.6 ||%|
The following “Results of Operations Year Ended December 31, 2021 Compared with Year Ended December 31, 2020” section presents an analysis of our consolidated operating results displayed in the Consolidated Statement of Operations. A discussion regarding our financial condition and results of operations for the year ended December 31, 2020 compared to the year ended December 31, 2019 can be found under Item 7 in our Annual Report on Form 10-K for the fiscal year ended December 31, 2020, filed with the Securities and Exchange Commission on February 25, 2021.
Results of Operations
Year Ended December 31, 2021 Compared with Year Ended December 31, 2020
The principal factors impacting us during the year ended December 31, 2021, compared with the year ended December 31, 2020 were:
•the impact on global business activity of the COVID-19 pandemic;
•approximately $134.6 million of goodwill and indefinite-lived intangible asset impairment charges in 2020;
•a change in our accounting policy for asbestos-related defense costs during 2020;
•realignment expenses in response to reduced end-market demand following the outbreak of the COVID-19 pandemic;
•the impact of our debt refinancing activities;
•the impact of our recent acquisitions, primarily Affaba & Ferrari, in December 2020;
•the impact of material cost increase, primarily resin-related; and
•the impact of a reduction in our effective tax rate from 2020 to 2021.
Overall, net sales increased approximately $87.1 million, or approximately 11.3%, to $857.1 million in 2021, as compared to $770.0 million in 2020, primarily as a result of acquisitions, which added approximately $46.9 million of sales. Organic sales, excluding the impact of currency exchange and acquisitions, increased approximately $31.5 million, primarily due to increases in sales of products used in food and beverage applications in our Packaging segment and of industrial products in both our Specialty Products and Packaging segments. These increases were partially offset by the expected decline in sales of dispensing products that help fight the spread of germs in our Packaging segment, as the demand levels decreased compared with the record-high levels in 2020. In addition, net sales increased approximately $8.7 million due currency exchange, as our reported results in U.S. dollars were favorably impacted as a result of the weakening U.S. dollar relative to foreign currencies.
Gross profit margin (gross profit as a percentage of sales) approximated 25.3% and 23.6% in 2021 and 2020, respectively. Gross profit margin increased primarily due the impact of lower realignment, contingent liability, and purchase accounting charges of approximately $13.0 million, $2.0 million, and $2.0 million, respectively, in 2021 than in 2020. These increases, plus a more favorable product sales mix and leveraging of our prior realignment actions in our Specialty Products segment were partially offset by approximately $11 million higher material costs than recovered via commercial actions (primarily for resin) in our Packaging segment and lower fixed cost absorption and labor inefficiencies within our Aerospace segment.
Operating profit (loss) margin (operating profit as a percentage of sales) approximated 11.1% and (11.5)% in 2021 and 2020, respectively. Operating profit (loss) increased $183.4 million, to an operating profit of approximately $95.1 million in 2021, as compared to an operating loss of approximately $88.3 million in 2020, primarily due to approximately $134.6 million of goodwill and indefinite-lived intangible asset impairment charges as well as the impact of the $2.0 million pre-acquisition contingent liability charge within our Aerospace segment, which were recorded in 2020 and did not repeat in 2021. Operating profit and margin further increased due to higher sales levels and lower realignment and purchase accounting costs in 2021 than in 2020. These increases were partially offset by higher material costs (primarily resin) in our Packaging segment and labor inefficiencies and lower fixed cost absorption within our Aerospace segment.
Interest expense decreased approximately $0.2 million, to $14.5 million in 2021, as compared to $14.7 million in 2020, as a lower effective interest rate more than offset an increase in our weighted average borrowings.
We incurred approximately $10.5 million of debt financing and related expense in 2021, of which approximately $10.3 million was related to expenses incurred associated with the redemption of our 2025 Senior Notes and approximately $0.2 million related to the write-off of previously capitalized deferred financing fees associated with our Credit Agreement.
Other income (expense) decreased approximately $1.2 million to other expense of approximately $1.0 million in 2021, from other income of approximately $0.2 million in 2020, primarily due to a year-over-year increase in losses on transactions denominated in foreign currencies.
The effective income tax rate for 2021 was 17.1%, compared to 22.3% for 2020. We recorded income tax expense of approximately $11.8 million in 2021, as compared to an income tax benefit of $23.0 million in 2020. During 2021, we reported domestic and foreign pre-tax income of approximately $28.4 million and $40.7 million, respectively, as compared to a 2020 domestic pre-tax loss of approximately $134.6 million and foreign pre-tax income of approximately $31.9 million. The effective tax rate for 2021 varied from the U.S. federal statutory rate primarily as a result of income tax incentives in a foreign jurisdiction, the impact of certain non-deductible expenses and an increase in the statutory tax rate in another foreign jurisdiction which increased the value of certain deferred tax assets. Our effective tax rate for 2020 was impacted by a decrease in profitability in the U.S. resulting from various one-time charges, including impairment of goodwill and indefinite-lived intangible assets and a change in our accounting policy for asbestos-related defense costs. During 2020, we also undertook certain tax-planning actions with respect to restructuring our intercompany debt, resulting in the recognition of a $6.4 million deferred tax benefit.
Net income (loss) increased approximately $137.1 million to net income of approximately $57.3 million in 2021, compared to a net loss of $79.8 million in 2020. This increase was primarily a result of an increase in operating profit of approximately $183.4 million and a decrease in interest expense of $0.2 million, partially offset by debt financing and related expenses of approximately $10.5 million, an increase in tax expense of approximately $34.8 million and an increase in other expense of $1.2 million.
See below for a discussion of operating results by segment.
Packaging. Net sales increased approximately $44.9 million, or 9.2%, to $533.3 million in 2021, as compared to $488.3 million in 2020. Acquisition-related sales growth was approximately $42.3 million, comprised of $36.3 million of sales from our December 2020 acquisition of Affaba & Ferrari, $5.3 million resulting from the January through March 2021 sales of our April 2020 acquisition of Rapak and $0.7 million of sales from our December 2021 acquisition of Omega. Sales of products used in food and beverage markets increased by approximately $19.1 million, primarily due to increased demand for caps and closures and flexible packaging as the hospitality sector began to rebound from prior COVID-19 pandemic-related shutdowns. Sales of products used in industrial markets increased by approximately $13.5 million, primarily as a result of higher demand for closure products in North America. Sales of dispensing products used in beauty and personal care as well as home care applications that help fight the spread of germs decreased by approximately $42.4 million, as demand has abated for these products from the peak levels in 2020 as a result of the COVID-19 pandemic. Net sales also increased by approximately $8.7 million due to currency exchange, as our reported results in U.S. dollars were favorably impacted as a result of the weakening U.S. dollar relative to foreign currencies.
Packaging's gross profit increased approximately $3.3 million to $145.8 million, or 27.3% of sales, in 2021, as compared to $142.4 million, or 29.2% of sales, in 2020, primarily due to the higher sales levels, plus approximately $3.1 million of currency exchange, as our reported results in U.S. dollars were favorably impacted as a result of the weakening U.S. dollar relative to foreign currencies. Although gross profit dollars increased, gross profit margin decreased as the impact of a more favorable product sales mix, as higher margin industrial and food and beverage products comprised a larger percentage of total sales, was offset by approximately $11 million of higher material costs (primarily resin) than were recovered via sales price increases during 2021. Gross profit margin was also unfavorably impacted by inflationary headwinds on utilities costs, higher labor costs driven by pandemic-related shortages and higher freight costs driven by increased container costs and freight lane rates. In addition, we recognized approximately $1.6 million of realignment costs during 2021 primarily related to the closure of our Union City, California manufacturing facility and consolidation into our Indianapolis, Indiana and Woodridge, Illinois facilities as compared to $1.1 million of realignment costs in 2020, primarily related to the disposal of certain equipment removed from service.
Packaging's selling, general and administrative expenses increased approximately $1.3 million to $49.1 million, or 9.2% of sales, in 2021, as compared to $47.9 million, or 9.8% of sales, in 2020, primarily due to higher ongoing selling, general and administrative costs associated with our acquisitions, partially offset by approximately $1.2 million in charges associated with realignment actions in 2020, primarily for severance, that did not repeat in 2021.
Packaging's operating profit increased approximately $2.5 million to $96.5 million, or 18.1% of sales, in 2021, as compared to $94.0 million, or 19.2% of sales, in 2020, primarily due to higher sales levels, a more favorable product sales mix and favorable currency exchange, which were partially offset by the impact of higher material and other manufacturing input costs, incremental realignment charges and higher selling, general and administrative expenses.
Aerospace. Net sales increased approximately $15.6 million, or 9.3%, to $183.3 million in 2021, as compared to $167.7 million in 2020. RSA, acquired in February 2020, added approximately $4.3 million of sales for January and February 2021 and TFI, acquired in December 2021, added approximately $0.3 million of sales. Sales of our fastener products increased approximately $11.2 million, as approximately $29.4 million of sales of customers' stocking orders for highly-engineered fasteners in 2021 were partially offset by lower year-over-year sales resulting from current and expected future reduced air travel due to the COVID-19 pandemic. Sales of our engineered components products declined by approximately $0.2 million.
Gross profit within Aerospace increased approximately $13.0 million to $40.0 million, or 21.8% of sales, in 2021, from $27.0 million, or 16.1% of sales, in 2020, primarily due to charges recorded in 2020 that did not repeat in 2021. First, we recorded approximately $4.5 million lower realignment charges in 2021 compared with 2020, which were principally related to inventory reductions and facility consolidations in response to the COVID-19 pandemic. In addition, in 2020, we recorded a $2.0 million charge related to an updated estimate of a pre-acquisition contingent liability, as well as an approximate $2.0 million purchase accounting non-cash charge related to the step-up of RSA's inventory to fair value and subsequent amortization, each of which did not repeat in 2021. Gross profit margin was further aided by a more favorable product sales mix in 2021, as the stocking orders were primarily for highly-engineered fasteners that command above-average profit margins. All of these factors were partially offset by lower absorption of fixed costs and labor inefficiencies during 2021 driven by the COVID-19 pandemic.
Selling, general and administrative expenses increased approximately $1.1 million to $26.7 million, or 14.6% of sales, in 2021, as compared to $25.6 million, or 15.2% of sales, in 2020, primarily due to the impact of higher ongoing selling, general and administrative costs associated with our acquisitions.
Operating profit (loss) within Aerospace increased approximately $146.7 million to an operating profit of $13.3 million, or 7.2% of sales, in 2021, as compared to an operating loss of $133.4 million, or 79.6% of sales, in 2020, primarily due to approximately $134.6 million of goodwill and indefinite-lived intangible asset impairment charges during 2020. Operating profit also improved due to realignment and other charges recorded in 2020 that did not repeat in 2021, as well as through a more favorable product sales mix, partially offset by labor inefficiencies, lower absorption of fixed costs and higher selling, general and administrative expenses.
Specialty Products. Net sales increased approximately $26.6 million, or 23.4%, to $140.5 million in 2021, as compared to $113.9 million in 2020. Sales of our cylinder products increased by approximately $17.9 million due to a higher demand for steel cylinders in North America as industrial activity continues to rebound following significantly depressed demand in 2020 as result of the COVID-19 pandemic. Sales of engines, compressors and related parts used in upstream oil and gas applications increased by approximately $8.7 million primarily as a result of higher oil-field activity in North America. Our 2020 sales included approximately $0.7 million related to the liquidation of non-core inventory following our strategic decision to streamline Arrow Engine's product line offering.
Gross profit within Specialty Products increased approximately $18.8 million to $31.5 million, or 22.4% of sales, in 2021, as compared to $12.7 million, or 11.1% of sales, in 2020. During 2020, we executed certain realignment actions in response to reduced end market demand as a result of the COVID-19 pandemic, resulting in approximately $9.0 million of non-cash charges, primarily related to Arrow Engine streamlining its product line offering and liquidating its non-core inventory, which did not repeat in 2021. In addition, gross profit increased in 2021 due to higher sales levels, while margins improved due to favorable product sales mix and leveraging previous realignment actions.
Selling, general and administrative expenses within Specialty Products increased approximately $1.1 million to $9.0 million, or 6.4% of sales, in 2021, as compared to $7.9 million, or 6.9% of net sales, in 2020. Our 2021 selling, general and administrative expenses have increased primarily due to higher employment and spending levels incurred to support the increase in sales levels. We incurred selling, general and administrative realignment expenses of approximately $0.7 million in 2020 related to severance that did not repeat in 2021.
Operating profit within Specialty Products increased approximately $18.2 million to $22.6 million, or 16.0% of sales, in 2021, as compared to $4.4 million, or 3.8% of sales, in 2020, primarily due to the impact of 2020 realignment costs that did not repeat in 2021, as well as higher sales and related profit conversion leveraging the 2020 realignment actions without the need to add significant incremental fixed costs.
Corporate Expenses. Corporate expenses included in operating profit consist of the following (dollars in millions):
| ||Year ended December 31,|
|Corporate operating expenses||$||26.1 ||$||20.8 |
|Non-cash stock compensation||9.5 ||8.2 |
|Legacy (income) expenses, net||1.6 ||24.2 |
| Corporate expenses||$||37.2 ||$||53.2 |
Corporate expenses included in operating profit decreased approximately $16.0 million to $37.2 million in 2021, from $53.2 million in 2020, primarily as a result of the $23.4 million non-cash charge recorded in 2020 due to the change of our accounting policy for asbestos-related defense costs. In 2021, we commissioned our actuary to update the asbestos study, and recorded a non-cash charge of $1.5 million to increase the liability estimate. Corporate operating expenses increased primarily as a result of realignment charges related to the corporate office legal and finance groups in 2021 as well as an increase in professional fees related to corporate development activities.
Liquidity and Capital Resources
Cash flows provided by operating activities in 2021 were approximately $134.2 million, as compared to approximately $127.4 million in 2020. Significant changes in cash flows provided by operating activities and the reasons for such changes are as follows:
•In 2021, the Company generated approximately $139.2 million in cash flows, based on the reported net income of approximately $57.3 million and after considering the effects of non-cash items related to depreciation, amortization, loss on dispositions of assets, changes in deferred income taxes, debt financing and related expenses, stock-based compensation, change in legacy liability estimate, and other operating activities. In 2020, the Company generated approximately $105.0 million in cash flows based on the reported net loss of approximately $79.8 million and after considering the effects of similar non-cash items and the impairment of goodwill and indefinite-lived intangible assets.
•Increases in accounts receivable resulted in a use of cash of approximately $11.2 million in 2021, while decreases in accounts receivable resulted in a source of cash of approximately $9.6 million 2020, primarily due to timing of net sales and related cash collections. Days sales outstanding of receivables remained relatively consistent in 2021 compared to 2020, and decreased by approximately four days through 2020 compared to 2019, as we placed a significant focus on our credit and collections process, particularly in those businesses most impacted by the pandemic where credit risk was heightened.
•We increased our investment in inventory by approximately $1.0 million in 2021, while decreasing our investment in inventory by approximately $4.0 million in 2020. Our days sales in inventory decreased by approximately nine days in 2021 compared with 2020 through active inventory management and selling through certain inventory items that were at elevated levels at the end of 2020 due to lower demand as a result of the COVID-19 pandemic. Our days sales in inventory decreased by approximately eight days in 2020 compared to 2019, primarily as a result of the strategic decision in our Arrow Engine division to streamline its product line offering during 2020. We continue to moderate inventory levels in line with sales levels.
•Decreases in prepaid expenses and other assets resulted in a source of cash of approximately $5.0 million and $4.4 million in 2021 and 2020, respectively. The changes in 2021 and 2020 are primarily as a result of the timing of payments made for income taxes and certain operating expenses.
•Increases in accounts payable and accrued liabilities resulted in a source of cash of approximately $2.1 million and $4.5 million in 2021 and 2020, respectively. Our days accounts payable on hand increased by approximately five days in 2021 due to timing and mix of payments terms in 2021 while days payables decreased by approximately 15 days in 2020, primarily as we paid certain key Packaging vendors more quickly in 2020 to ensure our orders remained a top priority for them given our robust demand levels and minimal available capacity in the marketplace. This decrease was more than offset by our increase in accrued liabilities in 2020, primarily as a result of the timing and amount of wage-related accruals.
Net cash used for investing activities was approximately $79.2 million and $232.1 million in 2021 and 2020, respectively. During 2021, we paid approximately $34.3 million, net of cash acquired, to acquire Omega and TFI. We invested approximately $45.1 million in capital expenditures as we have continued our investment in growth, capacity and productivity-related capital projects. During 2020, we paid approximately $193.5 million, net of cash acquired, to acquire RSA, Rapak and Affaba & Ferrari. In 2020, we invested approximately $40.5 million in capital expenditures and received cash from the disposition of business, property and equipment of approximately $2.0 million.
Net cash provided by financing activities was approximately $11.8 million and $6.1 million in 2021 and 2020, respectively. During 2021, we issued $400.0 million principal amount of senior notes, made net repayments of approximately $48.6 million on our revolving credit facilities, and redeemed $300.0 million principal amount of senior notes. In connection with refinancing our long-term debt, we paid approximately $13.6 million of debt financing fees and redemption premium. We also purchased approximately $19.1 million of outstanding common stock, used a net cash amount of approximately $5.2 million related to our stock compensation arrangements and paid dividends of approximately $1.7 million. During 2020, we received proceeds from borrowings, net of repayments, of approximately $48.2 million on our revolving credit facilities, purchased approximately $39.4 million of outstanding common stock and used a net cash amount of approximately $2.6 million related to our stock compensation arrangements.
Our Debt and Other Commitments
In March 2021, we issued the 2029 Senior Notes in a private placement under Rule 144A of the Securities Act of 1933, as amended. We used the proceeds from the 2029 Senior Notes offering to pay fees and expenses of approximately $5.1 million related to the offering and pay fees and expenses of $1.1 million related to amending our Credit Agreement. In connection with the issuance, we completed the redemption of our 2025 Senior Notes, paying $300.0 million to retire the outstanding principal amount plus $7.3 million as a redemption premium. The remaining cash proceeds from the 2029 Senior Notes were used for general corporate purposes, including repaying all outstanding revolving credit facility borrowings. The $5.1 million of fees and expenses related to the 2029 Senior Notes were capitalized as debt issuance costs, while the $7.3 million redemption premium, as well as approximately $3.0 million of unamortized debt issuance costs associated with the 2025 Senior Notes were recorded as expense within debt financing and related expenses in the accompanying consolidated statement of operations.
The 2029 Senior Notes accrue interest at a rate of 4.125% per annum, payable semi-annually in arrears on April 15 and October 15, commencing on October 15, 2021. The payment of principal and interest is jointly and severally guaranteed, on a senior unsecured basis by certain named subsidiaries of the Company. The 2029 Senior Notes are pari passu in right of payment with all existing and future senior indebtedness and subordinated to all existing and future secured indebtedness to the extent of the value of the assets securing such indebtedness. In 2021, our consolidated subsidiaries that do not guarantee the Senior Notes represented approximately 28% of the total of guarantor and non-guarantor net sales, treating each as a consolidated group and excluding intercompany transactions between guarantor and non-guarantor subsidiaries. In addition, our non-guarantor subsidiaries represented approximately 42% and 50% of the total guarantor and non-guarantor assets and liabilities, respectively, as of December 31, 2021, treating the guarantor and non-guarantor subsidiaries each as a consolidated group.
Prior to April 15, 2024, we may redeem up to 40% of the principal amount of the 2029 Senior Notes at a redemption price of 104.125% of the principal amount, plus accrued and unpaid interest, if any, to the redemption date, with the net cash proceeds of one or more equity offerings provided that each such redemption occurs within 90 days of the date of closing of each such equity offering. In addition, prior to April 15, 2024, we may redeem all or part of the 2029 Senior Notes at a redemption price equal to 100% of the principal amount thereof, plus accrued and unpaid interest, if any, to the redemption date, plus a "make whole" premium.
In March 2021, we amended our Credit Agreement in connection with the issuance of the 2029 Senior Notes to extend the maturity date. We incurred fees and expenses of approximately $1.1 million related to the amendment, all of which were capitalized as debt issuance costs. We also recorded approximately $0.2 million of non-cash expense related to the write-off of previously capitalized deferred financing fees.
Below is a summary of key terms under the Credit Agreement as of December 31, 2021, compared to the key terms prior to the amendment (showing gross availability):
($ in millions)
|Credit Agreement (as amended)|
|Senior secured revolving credit facility||$300.0||3/29/2026|
LIBOR(a) plus 1.500%(b)
|Credit Agreement (prior to amending)|
|Senior secured revolving credit facility||$300.0||9/20/2022|
LIBOR(a) plus 1.500%(b)
(a) London Interbank Offered Rate ("LIBOR")
(a) The interest rate spread is based upon the leverage ratio, as defined, as of the most recent determination date.
The senior secured revolving credit facility under the Credit Agreement permits borrowings denominated in specific foreign currencies, subject to a $125.0 million sub limit. The Credit Agreement also provides for incremental revolving credit commitments in an amount not to exceed the greater of $200 million and an amount such that, after giving effect to such incremental commitments and the incurrence of any other indebtedness substantially simultaneously with the making of such commitments, the senior secured net leverage ratio, as defined in the Credit Agreement, is no greater than 3.00 to 1.00. The terms and conditions of any incremental revolving credit facility commitments must be no more favorable than the existing credit facility.
Amounts drawn under our revolving credit facility fluctuate daily based upon our working capital and other ordinary course needs. Availability under our revolving credit facility depends upon, among other things, compliance with our Credit Agreement's financial covenants. Our Credit Agreement contains various negative and affirmative covenants and other requirements affecting us and our subsidiaries, including the ability to, subject to certain exceptions and limitations, incur debt, liens, mergers, investments, loans, advances, guarantee obligations, acquisitions, assets dispositions, sale-leaseback transactions, hedging agreements, dividends and other restricted payments, transactions with affiliates, restrictive agreements and amendments to charters, bylaws, and other material documents. The terms of our Credit Agreement require us and our subsidiaries to meet certain restrictive financial covenants and ratios computed quarterly, including a maximum total net leverage ratio (total consolidated indebtedness plus outstanding amounts under any accounts receivable securitization facility, less the aggregate amount of certain unrestricted cash and unrestricted permitted investments, as defined, over consolidated EBITDA, as defined) and a minimum interest expense coverage ratio (consolidated EBITDA, as defined, over the sum of consolidated cash interest expense, as defined, and preferred dividends, as defined). Our permitted total net leverage ratio under the Credit Agreement is 4.00 to 1.00 as of December 31, 2021. If we were to complete an acquisition which qualifies for a Covenant Holiday Period, as defined in our Credit Agreement, then our permitted total net leverage ratio cannot exceed 4.50 to 1.00 during that period. Our actual total net leverage ratio was 1.60 to 1.00 at December 31, 2021. Our permitted interest expense coverage ratio under the Credit Agreement is 3.00 to 1.00, and our actual interest expense coverage ratio was 13.31 to 1.00 as of December 31, 2021. At December 31, 2021, we were in compliance with our financial and other covenants contained in the Credit Agreement.
The following is a reconciliation of net income (loss), as reported, which is a GAAP measure of our operating results, to Consolidated Bank EBITDA, as defined in our Credit Agreement, for the year ended December 31, 2021. We present Consolidated Bank EBITDA to show our performance under our financial covenants. Dollars are in thousands in the below tables.
| ||Year ended|
December 31, 2021
|Net income||$||57,310 |
|Bank stipulated adjustments:|
|Interest expense, net (as defined)||14,510 |
|Income tax expense||11,800 |
|Depreciation and amortization||53,450 |
Non-cash compensation expense(1)
|Non-cash charges for deferred tax asset valuation allowances||250 |
|Other non-cash expenses or losses||1,210 |
Non-recurring expenses or costs(2)
|Extraordinary, non-recurring or unusual gains or losses||2,000 |
|Effects of purchase accounting adjustments||830 |
|Business and asset dispositions||130 |
|Net losses on early extinguishment of debt||3,000 |
|Permitted acquisitions||3,290 |
|Currency gains and losses||890 |
|Consolidated Bank EBITDA, as defined||$||177,460 |
| ||December 31, 2021|
Total Indebtedness, as defined(3)
|Consolidated Bank EBITDA, as defined||177,460 |
|Actual total net leverage ratio||1.60 ||x|
|Covenant requirement||4.00 ||x|
| ||Year ended|
December 31, 2021
|Interest expense, as defined||$||14,510 |
|Bank stipulated adjustments:|
|Non-cash amounts attributable to amortization of financing costs||(960)|
|Total Consolidated Cash Interest Expense, as defined||$||13,340 |
| ||December 31, 2021|| |
|Consolidated Bank EBITDA, as defined||$||177,460 |
|Total Consolidated Cash Interest Expense, as defined||13,340 |
|Actual interest expense coverage ratio||13.31 ||x|
|Covenant requirement||3.00 ||x|
(1) Non-cash compensation expenses resulting from the grant of equity awards.
(2) Non-recurring costs and expenses relating to diligence and transaction costs, purchase accounting costs, severance, relocation and restructuring expenses.
(3) Includes approximately $3.8 million of acquisition related contingent consideration as of December 31, 2021.
The Credit Agreement allows issuance of letters of credit, not to exceed $40.0 million in aggregate, against revolving credit facility commitments. We placed cash on deposit with a financial institution to be held as cash collateral for our outstanding letters of credit; therefore, as of December 31, 2021 and December 31, 2020, we had no letters of credit issued against our revolving credit facility. At December 31, 2021, we had no amounts outstanding under our revolving credit facility and had $300.0 million potentially available after giving effect to letters of credit issued and outstanding. At December 31, 2020, we had $50.5 million amounts outstanding under our revolving credit facility and had $249.5 million potentially available after giving effect to letters of credit issued and outstanding. Our restricted cash deposits are used for a variety of purposes, including support of certain operating lease agreements, vendor payment terms and other subsidiary operating activities, and to meet various states' requirements to self-insure workers' compensation claims, including incurred but not reported claims. Our borrowing capacity was not reduced by leverage restrictions contained in the Credit Agreement as of December 31, 2021 and December 31, 2020.
We rely upon our cash flow from operations and available liquidity under our revolving credit facility to fund our debt service obligations and other contractual commitments, working capital and capital expenditure requirements. At the end of each quarter, we have historically used cash on hand from our domestic and certain foreign subsidiaries to pay down amounts outstanding under our revolving credit facility, as applicable.
Our weighted average borrowings approximated $401.9 million during 2021, compared to $368.9 million during 2020, primarily due to a higher aggregate principal balance on our senior notes due to the issuance of the 2029 Senior Notes and the redemption of the 2025 Senior Notes during 2021.
In May 2021, we, through one of our non-U.S. subsidiaries, entered into a revolving loan facility with a borrowing capacity of $4 million. The facility is guaranteed by TriMas Corporation. There were no borrowings on this loan facility as of December 31, 2021.
Cash management related to our revolving credit facility is centralized. We monitor our cash position and available liquidity on a daily basis and forecast our cash needs on a weekly basis within the current quarter and on a monthly basis outside the current quarter over the remainder of the year. Our business and related cash forecasts are updated monthly.
In considering the economic uncertainty surrounding the potential business impacts from the COVID-19 pandemic with respect to our operations, supply chains, distribution channels, and end-market customers, we took certain defensive actions during 2020 as we monitored our cash position and available liquidity. These actions included suspending our repurchase of our common stock, borrowing on our revolving credit facility, tightening our capital expenditures, advanced monitoring of our accounts receivable balances and flexing cost structures of operations expected to be most impacted by COVID-19. Given strong cash generation and our current liquidity position, we subsequently relaxed certain of these actions, choosing to further invest in capital expenditures, resume purchasing shares of our common stock and initiating a cash dividend.
The majority of our cash on hand as of December 31, 2021 is located within the United States, and given available funding under our revolving credit facility of $300.0 million at December 31, 2021 (after consideration of the aforementioned leverage restrictions) and based on forecasted cash sources and requirements inherent in our business plans, we believe that our liquidity and capital resources, including anticipated cash flows from operations, will be sufficient to meet our debt service, capital expenditure and other short-term and long-term obligation needs for the foreseeable future, as well as dividends and share repurchases.
We are subject to variable interest rates on our revolving credit facility. At December 31, 2021, 1-Month LIBOR approximated 0.10%. At December 31, 2021, we had no amounts outstanding on our revolving credit facility and, therefore, no variable rate-based borrowings outstanding.
In November 2021, we amended the Credit Agreement to replace LIBOR with a benchmark interest rate determined based on the currency denomination of borrowings, effective January 1, 2022.
In addition to our long-term debt, we have other cash commitments related to leases. We account for these lease transactions as operating leases, and incurred rent expense for continuing operations related thereto of approximately $11.0 million in 2021. We continue to be party to non-cancelable leases for certain facilities we have exited as part of restructuring activities, and have entered into sublease agreements to minimize our net lease payments. We expect leasing will continue to be an available financing option to fund future capital expenditure requirements.
In March 2020, we announced our Board of Directors had authorized us to increase the purchase of our common stock up to $250 million in the aggregate, an increase of $100 million from the previous authorization. During 2021, 2020 and 2019, we purchased 596,084, 1,582,049 and 1,230,050 shares of our outstanding common stock for approximately $19.1 million, $39.4 million and $36.7 million, respectively. Since the initial authorization through December 31, 2021, we have purchased 3,850,815 shares of our outstanding common stock for an aggregate purchase price of approximately $107.4 million. We will continue to evaluate opportunities to return capital to shareholders through the purchase of our common stock, depending on market conditions, including the potential impact of the COVID-19 pandemic, and other factors.
Under various agreements, we are obligated to make future cash payments in fixed amounts. These include payments under our long-term debt agreements, rent payments required under operating lease agreements, certain benefit obligations and interest obligations on our long-term debt. The following table summarizes our material contractual cash obligations as of December 31, 2021 (dollars in thousands).
|Payments Due by Periods|
|1 - 3 Years||3 - 5 Years||More than|
|Contractual cash obligations:|
|Long-term debt||$||400,000 ||$||— ||$||— ||$||— ||$||400,000 |
|Operating lease obligations||57,500 ||8,500 ||16,860 ||13,210 ||18,930 |
|Benefit obligations||14,220 ||1,170 ||2,470 ||2,660 ||7,920 |
Interest obligations (a)
|123,750 ||16,500 ||33,000 ||33,000 ||41,250 |
|Contingent consideration||3,760 ||— ||3,760 ||— ||— |
|Total contractual obligations||$||599,230 ||$||26,170 ||$||56,090 ||$||48,870 ||$||468,100 |
(a) Our Senior Notes bear interest at 4.125%. The future interest obligations calculation excludes the impact of our cross-currency swap agreements. See Note 14, "Derivative Instruments," included in Item 8, "Financial Statements and Supplementary Data," within this Form 10-K for additional information.
The liability related to unrecognized tax benefits has been excluded from the contractual obligations table because a reasonable estimate of the timing and amount of cash flows from future tax settlements cannot be determined. For additional information, refer to Note 23, "Income Taxes," included in Item 8, "Financial Statements and Supplementary Data," within this Form 10-K.
We conduct business in various locations throughout the world and are subject to market risk due to changes in the value of foreign currencies. The functional currencies of our foreign subsidiaries are primarily the local currency in the country of domicile. We manage these operating activities at the local level and revenues and costs are generally denominated in local currencies; however, results of operations and assets and liabilities reported in U.S. dollars will fluctuate with changes in exchange rates between such local currencies and the U.S. dollar.
We have historically used derivative financial instruments to manage currency risks, as we seek to mitigate the risk associated with fluctuations in currency rates impacting cash flows related to certain receivables, payables and intercompany transactions denominated in foreign currencies. We also use cross-currency swap agreements to mitigate currency risks associated with the net investment in certain of our foreign subsidiaries. See Note 14, "Derivative Instruments," included in Item 8, "Financial Statements and Supplementary Data," within this Form 10-K for additional information.
We are also subject to interest risk as it relates to our long-term debt. We have historically used interest rate swap agreements to fix the variable portion of our debt to manage this risk. See Note 14, "Derivative Instruments," included in Item 8, "Financial Statements and Supplementary Data," within this Form 10-K for additional information.
TriMas is listed in the NASDAQ Global Select MarketSM. Our stock trades under the symbol "TRS."
We and certain of our outstanding debt obligations are rated by Standard & Poor's and Moody's. On March 24, 2021, Moody's assigned a Ba3 rating to our 2029 Senior Notes, as presented in Note 13, "Long-term Debt" included in Item 8, "Financial Statements and Supplementary Data" within this Form 10-K. Moody's also affirmed a Ba2 Corporate Family Rating and maintained its outlook as stable. On March 15, 2021, Standard & Poor's assigned a BB- rating to our 2029 Senior Notes. On February 26, 2021 Standard & Poor's affirmed a BB corporate credit rating and maintained its outlook as stable. If our credit ratings were to decline, our ability to access certain financial markets may become limited, our cost of borrowings may increase, the perception of us in the view of our customers, suppliers and security holders may worsen and as a result, we may be adversely affected.
Over the past two years, the COVID-19 pandemic has significantly affected each of our businesses and how we operate, albeit in different ways and magnitudes. Sales in our Packaging segment for dispensing and closure products we supply that are used in applications to fight the spread of germs have continued to be much stronger than before the COVID-19 pandemic, although, as expected, have abated from peak levels in 2020 at the onset of the COVID-19 pandemic. Sales in our Specialty Products segment had been depressed by low levels of industrial activity in the U.S. during 2020, but have since strongly rebounded in the last nine months of 2021. Sales in our Aerospace segment are expected to be lower than historical levels for an indefinite period as a result of low new commercial aircraft builds, but have been significantly boosted by customers' stocking orders throughout 2021.
We believe our 2021 financial results demonstrate our ability to effectively leverage our TriMas Business Model, working across our businesses with a high degree of connectivity to respond to changing market conditions, including the ongoing challenges presented by the COVID-19 pandemic. We have capitalized on opportunities where market demand was high, while also taking swift actions where market demand was sharply reduced. We have continued to take proactive realignment actions to mitigate the effects of lower demand from the COVID-19 pandemic as much as practical, while at the same time growing our businesses through organic new products as well as via bolt-on acquisitions.
Looking forward, we believe there will be a continued period of uncertainty related to demand levels for our products, whether it be when production rates for new aircraft builds, which require our fasteners and engineered products, will ramp-up, or whether general industrial activity will continue to increase toward pre-pandemic levels. We expect to continue to mitigate, as much as practical, the impact of low volumes in the most challenged end markets, executing realignment actions as necessary so we are positioned to gain operating leverage when these end markets recover. We believe we remain well positioned to capitalize on the recovery of the aerospace market, just as we have with the improvement in the industrial markets in the back half of 2021, as well as capture available market growth opportunities. We believe the continued effectiveness of vaccines, as well as continued measures intended to control the spread of the virus and future variants thereof, are among the most significant factors that could impact demand for our products.
As a result of continued uncertainties resulting from the COVID-19 pandemic, and their potential impact to our future results of operations, as well as to TriMas' market capitalization, we may record additional cash and non-cash charges related to further realignment actions, as well for uncollectible customer account balances, excess inventory and idle production equipment. At this time, we are not able to estimate the extent or amount of any such potential cash and non-cash charges.
Following the issuance of our 2029 Senior Notes and the amendment of our Credit Agreement in 2021, we believe our capital structure remains strong and that we have sufficient headroom under our financial covenants, and ample cash and available liquidity under our revolving credit facility, to meet our debt service, capital expenditure and other short-term and long-term obligations for the foreseeable future, as well as dividends and share repurchases.
We expect to continue to leverage the tenets of our TriMas Business Model to manage our multi-industry businesses and address the ongoing challenges presented by the COVID-19 pandemic, and on a longer-term basis, achieve our growth plans, execute continuous improvement initiatives to offset inflationary pressures, and seek lower-cost sources for input costs, all while continuously assessing the appropriateness of our manufacturing footprint and fixed-cost structure.
Impact of New Accounting Standards
See Note 2, "New Accounting Pronouncements," included in Item 8, "Financial Statements and Supplementary Data," within this Form 10-K.
Critical Accounting Policies
The following discussion of accounting policies is intended to supplement the accounting policies presented in Note 3, "Summary of Significant Accounting Policies" included in Item 8, "Financial Statements and Supplementary Data," within this Form 10-K. Certain of our accounting policies require the application of significant judgment by management in selecting the appropriate assumptions for calculating financial estimates. By their nature, these judgments are subject to an inherent degree of uncertainty. These judgments are based on our historical experience, our evaluation of business and macroeconomic trends, and information from other outside sources, as appropriate.
Receivables. Receivables are presented net of allowances for doubtful accounts of approximately $1.6 million and $2.1 million at December 31, 2021 and 2020, respectively. We monitor our exposure for credit losses and maintain adequate allowances for doubtful accounts. We determine these allowances based on our historical write-off experience and/or specific customer circumstances and provide such allowances when amounts are reasonably estimable and it is probable a loss has been incurred. Although we have been growing business with certain of our larger customers, and there has been some industry consolidation where certain of our customers are merging, we do not believe that significant credit risk exists or that we have a significant concentration of accounts receivable with a single customer or group of customers due to our diverse customer base. See Item 1A, "Risk Factors," for additional information regarding risks associated with a concentrated customer base.
Depreciation and Amortization. Depreciation is computed principally using the straight-line method over the estimated useful lives of the assets. Annual depreciation rates are as follows: building and land/building improvements three to 40 years, and machinery and equipment, three to 15 years. Capitalized debt issuance costs are amortized over the underlying terms of the related debt securities. Customer relationship intangibles are amortized over periods ranging from five to 25 years, while technology and other intangibles are amortized over periods ranging from one to 30 years.
Impairment of Long-Lived Assets and Definite-Lived Intangible Assets. We review, on at least a quarterly basis, the financial performance of each business unit for indicators of impairment. In reviewing for impairment indicators, we also consider events or changes in circumstances such as business prospects, customer retention, market trends, potential product obsolescence, competitive activities and other economic factors. An impairment loss is recognized when the carrying value of an asset group exceeds the future net undiscounted cash flows expected to be generated by that asset group. The impairment loss recognized is the amount by which the carrying value of the asset group exceeds its fair value.
Goodwill and Indefinite-Lived Intangibles. We assess goodwill and indefinite-lived intangible assets for impairment at the reporting unit level on an annual basis as of October 1, by reviewing relevant qualitative and quantitative factors. More frequent evaluations may be required if we experience changes in our business climate or as a result of other triggering events that take place. An impairment loss is recognized when the carrying value of the asset exceeds its fair value.
We determine our reporting units at the individual operating segment level, or one level below, when there is discrete financial information available that is regularly reviewed by segment management for evaluating operating results. For purposes of our 2021 goodwill impairment test, we had five reporting units, three of which had goodwill, within our three reportable segments.
We first perform a qualitative assessment for our annual goodwill impairment test and for our indefinite-lived intangible asset impairment test, which involves significant use of management's judgment and assumptions to determine whether it is more likely than not that the fair value of a reporting unit or indefinite-lived intangible asset is less than its carrying amount. In conducting the qualitative assessment, we consider macroeconomic conditions, industry and market considerations, overall financial performance, entity and reporting unit specific events, capital markets pricing, recent fair value estimates and carrying amounts, as well as legal, regulatory, and contractual factors. These factors are all considered in reaching a conclusion about whether it is more likely than not that the fair values of the intangible assets are less than the carrying values. If we conclude that further testing is required, we would perform a quantitative valuation to estimate the fair value of our intangible assets.
For purposes of the 2021 annual impairment tests, based on the qualitative assessments, we determined there were no indications that the fair value of a reporting unit or indefinite-lived intangible asset was less than its carrying amount; therefore, we determined that quantitative assessments were not required.
Future declines in sales and/or operating profit, declines in our stock price, or other changes in our business or the markets for our products could result in further impairments of our goodwill and indefinite-lived intangible assets.
Pension Benefits. We engage independent actuaries to compute the amounts of liabilities and expenses under defined benefit pension plans, subject to the assumptions that we determine are appropriate based on historical trends, current market rates and future projections as of the measurement date. Annually, we review the actual experience compared to the most significant assumptions used and makes adjustments to the assumptions, if warranted. Discount rates are based upon an expected benefit payments duration analysis and the equivalent average yield rate for high-quality fixed-income investments. Pension benefits are funded through deposits with trustees and the expected long-term rate of return on plan assets is based upon actual historical returns modified for known changes in the market and any expected change in investment policy. Certain accounting guidance, including the guidance applicable to pensions, does not require immediate recognition of the effects of a deviation between actual and assumed experience or the revision of an estimate. This approach allows the favorable and unfavorable effects that fall within an acceptable range to be netted.
Income Taxes. We compute income taxes using the asset and liability method, whereby deferred income taxes using current enacted tax rates are provided for the temporary differences between the financial reporting basis and the tax basis of assets and liabilities and for operating loss and tax credit carryforwards. We determine valuation allowances based on an assessment of positive and negative evidence on a jurisdiction-by-jurisdiction basis and record a valuation allowance to reduce deferred tax assets to the amount more likely than not to be realized. Recognized income tax positions are measured at the largest amount that is greater than 50% likely of being realized. Changes in recognition or measurement are reflected in the period in which the change in judgment occurs. We record interest and penalties related to unrecognized tax benefits in income tax expense.
Asbestos-related Matters. We accrue loss reserves for asbestos-related matters based upon an estimate of the ultimate liability for claims incurred, whether reported or not, including an estimate of future settlement costs and costs to defend. We utilize known facts and historical trends for Company-specific and general market asbestos-related activity, as well as an actuarial valuation in determining estimated required reserves which we believe are probable and reasonably estimable. Asbestos-related accruals are assessed at each balance sheet date to determine if the liability remains reasonably stated. Accruals for asbestos-related matters are included in the consolidated balance sheet in “Accrued liabilities” and “Other long-term liabilities.”
Other Loss Reserves. We have other loss exposures related to insurance, litigation and environmental claims. Establishing loss reserves for these matters requires the use of estimates and judgment in regard to risk exposure and ultimate liability. We are generally party to high deductible insurance programs for losses and liabilities related principally to workers' compensation, health and welfare claims and comprehensive general, product and vehicle liability. Generally, we are responsible for up to $0.8 million per occurrence under our retention program for workers' compensation, up to $1.5 million per occurrence under our retention programs for comprehensive general, product and vehicle liability, and have a $0.4 million per occurrence stop-loss limit with respect to our self-insured group medical plan. We accrue loss reserves up to our retention amounts based upon our estimates of the ultimate liability for claims incurred, including an estimate of related litigation defense costs, and an estimate of claims incurred but not reported using actuarial assumptions about future events. We accrue for such items when such amounts are reasonably estimable and probable. We utilize known facts and historical trends, as well as actuarial valuations in determining estimated required reserves. Changes in assumptions for factors such as medical costs and actual experience could cause these estimates to change significantly.
Item 7A. Quantitative and Qualitative Disclosures About Market Risk
In the normal course of business, we are exposed to market risk associated with fluctuations in commodity prices, insurable risks due to property damage, employee and liability claims, and other uncertainties in the financial and credit markets, which may impact demand for our products.
We conduct business in various locations throughout the world and are subject to market risk due to changes in the value of foreign currencies. The functional currencies of our foreign subsidiaries are primarily the local currency in the country of domicile. We manage these operating activities at the local level and revenues and costs are generally denominated in local currencies; however, results of operations and assets and liabilities reported in U.S. dollars will fluctuate with changes in exchange rates between such local currencies and the U.S. dollar. We use derivative financial instruments to manage currency risks associated with our procurement activities denominated in currencies other than the functional currency of our subsidiaries and the impact of currency rate volatility on our earnings.
We may also be subject to interest risk as it relates to long-term debt, for which we have historically and may prospectively employ derivative instruments such as interest rate swaps to mitigate the risk of variable interest rates. See Item 7 "Management's Discussion and Analysis of Financial Condition and Results of Operations" for details about our primary market risks, and the objectives and strategies used to manage these risks. Also see Note 13, "Long-term Debt," and Note 14, "Derivative Instruments," included in Item 8, "Financial Statements and Supplementary Data," within this Form 10-K for additional information.
Item 8. Financial Statements and Supplementary Data
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the shareholders and the Board of Directors of TriMas Corporation
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of TriMas Corporation and subsidiaries (the "Company") as of December 31, 2021 and 2020, the related consolidated statements of operations, comprehensive income, cash flows, and shareholders’ equity, for each of the three years in the period ended December 31, 2021, and the related notes and the schedule listed in the Index at Item 15 (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and 2020, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2021, in conformity with accounting principles generally accepted in the United States of America.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 01, 2022, expressed an unqualified opinion on the Company's internal control over financial reporting.
Basis for Opinion
These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.
Critical Audit Matter
The critical audit matter communicated below is a matter arising from the current-period audit of the financial statements that was communicated or required to be communicated to the audit committee and that (1) related to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.
Goodwill - Aerospace Fasteners Reporting Unit - Refer to Notes 3 and 9 to the financial statements.
Critical Audit Matter Description
The Company assesses goodwill for impairment on an annual basis as of October 1, and more frequently if there are changes in the business climate or as a result of a triggering event taking place. The Company’s evaluation of goodwill impairment involves a qualitative assessment to determine whether it is more likely than not that the fair value of the reporting unit is less than its carrying amount. The qualitative assessment involves significant use of management’s judgment and assumptions related to macroeconomic conditions, industry and market considerations, overall financial performance, entity and reporting unit specific events, and capital markets pricing. The Company also considered recent valuations of its reporting units, including the difference between the most recent fair value estimate and the carrying amount. Changes in these assumptions could have a significant effect on management’s conclusion about whether a quantitative goodwill impairment test is necessary to estimate the fair value of its reporting units.
The Company’s goodwill balance was $315 million as of December 31, 2021, of which $70 million was allocated to the Aerospace Fasteners Reporting Unit (“Aerospace Fasteners”). The Company concluded there were no indications that the fair value of any reporting unit was less than the carrying amount, therefore a quantitative assessment was not performed, and no impairment was recognized.
Given the nature of the Aerospace Fasteners operations, the assumptions used in the qualitative assessment, and the difference between the most recent fair value estimate and the carrying amount of Aerospace Fasteners, auditing management’s judgments related to the impact of macroeconomic conditions, overall financial performance for Aerospace Fasteners, and capital markets pricing involved especially subjective judgment.
How the Critical Audit Matter Was Addressed in the Audit
Our audit procedures related to management’s qualitative evaluation of goodwill impairment for Aerospace Fasteners included the following, among others:
•We tested the effectiveness of controls over goodwill, including those over management's judgments and assumptions related to macroeconomic conditions, industry and market considerations, overall financial performance, entity and reporting unit specific events, capital markets pricing, recent fair value estimates and carrying amounts.
•We evaluated management's ability to accurately forecast future revenues and EBITDA margins by comparing actual results to management's historical forecasts.
•We evaluated the reasonableness of management’s qualitative assessment of factors affecting revenue and EBITDA margin forecasts by comparing the forecasts to:
◦Historical revenues and EBITDA.
◦Internal communications to management and the Board of Directors.
◦Forecasted information included in industry reports for the Company and certain of its peer companies.
•We evaluated the impact of changes in management’s forecasts from the October 1, 2021, annual measurement date to December 31, 2021.
•With the assistance of our fair value specialists, we evaluated the reasonableness of management’s qualitative assessment by performing the following: (1) Researching GDP growth, inflation and/or other macroeconomic variables, as well as industry growth rates; (2) Estimate industry discount rates; (3) Research and analyze valuation multiple of guideline public companies to understand valuation trends, and research trends in growth and margins in guideline public companies; and (4) Obtain information to analyze the trend of market capitalization of the entity and public peer companies.
/s/ Deloitte & Touche LLP
March 1, 2022
We have served as the Company's auditor since 2013.
Consolidated Balance Sheet
(Dollars in thousands)
| ||December 31,|
|Current assets:|| || |
|Cash and cash equivalents||$||140,740 ||$||73,950 |
|Receivables, net||125,630 ||113,410 |
|Inventories||152,450 ||149,380 |
|Prepaid expenses and other current assets||12,950 ||15,090 |
|Total current assets||431,770 ||351,830 |
|Property and equipment, net||265,630 ||253,060 |
|Operating lease right-of-use assets||50,650 ||37,820 |
|Goodwill||315,490 ||303,970 |
|Other intangibles, net||196,730 ||206,200 |
|Deferred income taxes||9,740 ||19,580 |
|Other assets||33,630 ||21,420 |
|Total assets||$||1,303,640 ||$||1,193,880 |
|Liabilities and Shareholders' Equity|
|Current liabilities:|| || |
|Accounts payable||$||87,800 ||$||69,910 |
|Accrued liabilities||58,980 ||60,540 |
|Operating lease liabilities, current portion||8,120 ||6,740 |
|Total current liabilities||154,900 ||137,190 |
|Long-term debt, net||393,820 ||346,290 |
|Operating lease liabilities||43,780 ||31,610 |
|Deferred income taxes||21,260 ||24,850 |
|Other long-term liabilities||59,030 ||69,690 |
|Total liabilities||672,790 ||609,630 |
|Preferred stock $0.01 par: Authorized 100,000,000 shares;|
Issued and outstanding: None
|— ||— |
|Common stock, $0.01 par: Authorized 400,000,000 shares;|
Issued and outstanding: 42,836,574 shares at December 31, 2021 and 43,178,165 shares at December 31, 2020
|430 ||430 |
|Paid-in capital||732,490 ||749,050 |
|Accumulated other comprehensive loss||230 ||(5,620)|
|Total shareholders' equity||630,850 ||584,250 |
|Total liabilities and shareholders' equity||$||1,303,640 ||$||1,193,880 |
The accompanying notes are an integral part of these financial statements.
Consolidated Statement of Operations
(Dollars in thousands, except per share amounts)
| ||Year ended December 31,|
|Net sales||$||857,110 ||$||769,970 ||$||723,530 |
|Cost of sales||(639,920)||(587,890)||(529,630)|
|Gross profit||217,190 ||182,080 ||193,900 |
|Selling, general and administrative expenses||(121,970)||(134,480)||(102,530)|
|Net loss on dispositions of assets||(130)||(1,290)||(150)|
|Impairment of goodwill and indefinite-lived intangible assets||— ||(134,600)||— |
|Operating profit (loss)||95,090 ||(88,290)||91,220 |
|Other expense, net:|
|Debt financing and related expenses||(10,520)||— ||— |
|Other income (expense), net||(950)|